Middle size CNC Router XYZ1530

Specifications

XYZ1530 CNC Router
1 Water cooled spindle
2 HIWIN rail guide
3 Vacuum Table/Dust collector/Automatic-mist spray

XYZ 1530 Wood Working CNC Router

Description	Parameter
X, Y, Z working area	1500 X 3000 X 200 mm
X, Y Movement	Rack and Pinion transmission, Linear Square orbit (Taiwan Hiwin).
Z - Movement	Imported ball screw made in Germany Linear Square orbit (Taiwan HIWIN)
Resolution Working Accuracy Reposition Accuracy	0.01 mm 0.05 mm
Machine Bed Structure	Welded Steel tube structure
Bed Type	T Slot + Vacuum
Max. idling speed	25 m/min
Spindle Type	3.0,4.5kw water cooling (3.0, 6kw air cooled HSD Italy for option)
Spindle speed	0-24000 rpm (0-18000 rpm for HSD spindle)
Working voltage	Three Phase 380V/50Hz
Inverter	Delta Taiwan
Drive Motors	Stepper
Max. Power (without spindle)	1850 Watts
Max. Working Speed	18m/min
Command	G code, HPGL, U00, mmg, plt
Operating system	DSP
Interface	USB
Diameter of cutter	¦Õ3.175-¦Õ12.7
Dust collector (complete)	Yes
Work-holding	T Slot + By suction (vacuum)

 

Features:

1 The machine is welded with square steel tube, which has excellent stability and long life.

2  X and Y axis adopt rack and pinion transmission.

3 Z axis adopts ball screw transimission.

4 Lubrication system on rails.

5 Software compatability: CAD/DAM design software eg. Type3/CorelDraw/Artcam/Castmate,etc. It can run on Windows XP/2000,32bits.

6 It has function of recarving/resuming after tool breakage, temporary pause and power failure. It has Memery to capture processing point. (DSP can capture 6 this break point when the tool or blade is broken or insituation of postponement, or of power failure.(only DSP can resume from power failure)

7 It has intelligent protection for working table to prevent damage. Our solution is to put a 5 mm MDF board on top of  T-slot&vacuum table.

8 It has function of forecasting processing time.

9 It adopts advanced DSP system, with USB interface, for convenient ooperation. The engraver is capable of working completely off-line without any computer resources. Flas Memery 128 MB.

10 It has an independent control box.

11 Vacuum table with enough vacuum zones, which can hold different size of material. It is also very convenient to fix the material by clamp.

 

Function:

This machine is suitable to process various cabinet doors, solid wood doors, computer tables, panel furnitures, screens, craft windows,  etc. It can also be used for engraving and cutting of wood boards in large volume, together with 3D embossment, shadow carving, and so on.