Contact Platform Support
Help CenterZrO2 14.5% / 16.7% AR Fiberglass Chopped Strand Mat for GRC
Related Products
-
ZrO2 14.5% / 16.7% AR Fiberglass Mat for GRCNegotiableMOQ: 6400 Square Meters -
ZrO2 14.5% / 16.7% ARG Fiberglass Chopped Strand Mat for GRCNegotiableMOQ: 6400 Square Meters
-
ZRO2 16.7% ARG CHOPPED STRAND MAT as Seondary Reinforcement for GRCUS$ 0.85 - 0.9MOQ: 6400 Square Meters
-
AR Fiberglass MatNegotiableMOQ: 1 Ton
-
AR Fiberglass MatNegotiableMOQ: 1 Ton
HUIERJIE AR GLASSFIBRE MAT is an engineered AR-stem designed for use in the reinforcement of very thin layer (5-25 mm). It may be added to conventional mixes on site; Mix-design. Such as self-leveling compounds.
HUIERJIE AR GLASSFIBRE MAT has a high elastic modulus and tensile strength, making them ideal as an effective reinforcement for cement matrices. They will not rot or corrode, and are unaffected by UV radiation, making them suitable for use with minimal cover.
HUIERJIE AR GLASSFIBRE MAT is available in a range of nominal weight: Standard is 120 G/M2. It is produced by chopping Huierjie AR-rovings into 20-50mm strands and forming into a mat with a suitable binder. The mat has an open construction to permit penetration by cement mortar. The engineered binder, which dissolves with water further, assists incorporation into a cement matrix.
HUIERJIE AR GLASSFIBRE MAT may be used as a positioned reinforcement flooring systems.
AR GLASS FIBRE MAT
HUIERJIE AR GLASSFIBRE MAT is an engineered AR-stem designed for use in the reinforcement of very thin layer (5-20 mm)
Application:
HUIERJIE AR GLASSFIBRE MAT is available in a range of nominal weight: standard is 150g/M2. It is produced by chopping Huierjie AR-Roving into 20-50mm strands and forming into a mat with a suitable binder. The mat has an open construction to permit penetration by cement mortar. The engineered binder, which dissolves with water further, assists incorporation into a cement matrix.
HUIERJIE AR GLASSFIBRE MAT may be used as a positioned reinforcement flooring systems.
Packaging & Storage:
MAT Packing details: 100M2 /Roll /ctn,16ctns/pallet,20pallets/1*20'FCL. 32000M2 . MESH Packing details: 50M2 /Roll, 36rolls/pallet, 20pallets/1*20'FCL. 36000M2.
Huierjie AR Glassfibre mat & mesh pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15℃- 35℃ & relative humidity between 35%- 65%. If stored below 15℃, it is advisable to hold in workshop for 24 hours to prevent condensation before use.
Note:
Huierjie AR Glassfibre mesh are manufactured in compliance with EN15422:2008, BSEN13496:2002 and ETAG 004.
Send Inquiry to This Supplier
You May Also Like
-
Fiberglass MatNegotiableMOQ: 2400 Rolls
-
Colored Fiberglass Chopped Strand MatUS$ 1.3 - 1.6MOQ: 1 Ton
-
High-Temperature Resistant FRP Panel 2-10mm OEM ODM Supply UAE Commercial Building Ceiling Interior Cladding Systems FRP PanelUS$ 0.35 - 0.69MOQ: 200 Pieces
-
The Wet-process Glass Fiber Mat Weighing 25-120 Grams Has Good Corrosion ResistanceUS$ 0.2 - 0.5MOQ: 50000 Square Meters
-
Chopped Glass Fiber MatUS$ 1.2MOQ: 1000 Kilograms
-
Fiberglass Needle Mat 16mm ALUMINANegotiableMOQ: 100 Kilograms
-
Thin Chopped Strand Mat for Reinforced of FRP ProductsUS$ 800 - 1000MOQ: 1 Ton
-
C-Glass Fiberglass Type Chopped Strand Mat of Boat Building MaterialsUS$ 800 - 1,500MOQ: 2 Tons
-
Fiberglass Tadpole RopeUS$ 3 - 4MOQ: 500 Kilograms
-
High Quality E-Glass Fiberglass Chopped Strand Mat 300g Emulsion BinderUS$ 0.78 - 1.23MOQ: 1 Ton
