A2 0.077ml Accuracy Paint Tinting Equipment/A4 600ML Colorant Sequential Dispenser
Specifications
paint tinting equipment1Precise dispensing,
2Resorption keep nozzle from block
3Mixing motor keep colorant wet.
I. paint tinting equipment
The paint tinting equipment is our new model for sequential dispensing and especially designed for small to medium retail operations with limited floor space available. It features well-known piston pump system (40ml/stroke), centralized automatic bottom stirring and attractive appearances.
II. paint tinting equipment Technical Specification
Item |
Content |
Item |
Content |
Number of Canisters |
16/14/12/10/8/6 |
Min Dispensing |
0.077ml(1Y/384) |
Max Flow Rate |
0. 60ltr/min |
Canister Size |
3.8/2.3/1.8 Ltr |
Pump Size |
62mltr |
Stirring Speed |
20RPM |
Power |
100W |
Power Supply |
220V/110V±5% 50/60HZ |
Can Size (D x H) |
Max320X450mm |
Stirring Timing |
Stir 10 minutes every 4 hours |
Min80X100mm | |||
Noise Level |
<70dBA |
Weight: |
175±3 kg |
Machine Size (HxWx D) |
720X840X1300(mm) |
||
III. paint tinting equipment Main Composition
IV. paint tinting equipment Software
a.installation
b. fill colorant
c. purge and clean
d.dispense and tinting
V. paint tinting equipment Electric Diagram.
VI.Trouble Shooting
Problem |
Cause |
Action |
Stirring motor doesn’t work. |
1. A4 is not power on. 2. Fuse is broken. 3. Motor is not connected. 4. Motor is broken. |
1. Check the power. 2. Change the fuse. 3. Open the side door, reconnect wire. 4. Change the motor. |
Colorant dispense out not continually. |
1. There is air in the pump cylinder. 2. Colorant level is too low. 3. Colorant is dry and blocked. |
1. Purge cylinder. 2. Add colorant. 3. Clean canister. |
Canister is loosed. |
Fasten screw is loosed. |
Fasten screw. |
Dispensing colorant is difficult. |
1. Nozzle is blocked. 2. Valve motor is broken. 3. Valve handle cannot open. |
1. Clean Nozzle. 2. Change valve motor. 3. Adjust the motor and valve position. |
|
Piston difficult to move.
|
1. Colorant is dried inside. 2. Screw drive and guiding rod are not lubricated. 3. Fastening screw is loosed. |
1. Empty colorant, clean canister and pump cylinder. 2. Lubricate screw drive and guiding rod 3. Fasten screw. |
Abnormal noise from step motor. |
1. Voltage is out of normal range. 2. Screw drive and guiding rod are not lubricated. 3. Fastening screw is loosed. |
1. Check the power supply. 2. Lubricate screw and guiding rod 3. Fasten screw. |
Colorant appears on the nozzle. |
Sealing washer is damaged. |
Change sealing washer. |
LCD shows “Emergency Button Pressed”. |
1. Emergency button is pressed. 2. Emergency button is broken or the wire is disconnected. |
Release emergency button. Replace emergency button or connect wire. |
LCD shows “Door Open”. |
The door is not closed well. |
Close the door. |
VII. Contact.
Marketting Manager
Zhengzhou Golden Triumph Building Material Co., Ltd.
No. 63 , Weilai Road , New development Zone , Zhengzhou, China 450008
Tel: 0086-371-86036378
Fax:0086-371-86039318
Mobile:0086-18203975318 Skype:davischeng123123
Send Inquiry to This Supplier
You May Also Like
-
Rotary Drum Thickening/Dehydrating Belt PressesNegotiableMOQ: 1 Set
-
Customizable Mixing Tank for Food FactoryUS$ 6000.00 - 6300.00MOQ: 1 Set
-
GYC Soap Small Making MachineNegotiableMOQ: 1
-
High Quality JHS2000 Big Capacity Powder Mixer for Chemical PowderUS$ 10,000 - 15,000MOQ: 1 Set
-
China Dry Mortar Zenamix Powder Mix Plant, Pigment Powder Mixing Machine for Making DetergentUS$ 800 - 1,500MOQ: 1 Set
-
Oil Drilling Mud Liquid AgitatorNegotiableMOQ: 1 Set
-
Fertilizer Manure Blender MixerUS$ 3,000 - 35,000MOQ: 1 Set
-
Professional Fish Chicken Poultry Feed Mixing Machine, Cattle Feed Mixer Machine, Feed MixerUS$ 1,010 - 2,700MOQ: 1 Set
-
Dry Powder Mixer,Mixing Machine From ChinaUS$ 1,000 - 8,000MOQ: 1 Set
-
Glass Lined Agitated Nutsche FilterUS$ 1,600 - 36,000MOQ: 1 Set














