2015 New Premuim Promotion Standard Hydraulic Power Station for Automatic Block Making Machine Price
2015 new premuim promotion standard hydraulic power station for automatic block making machine price
A hydraulic system is usually composed of hydraulic pump, electric motor, oil tank, manifold
block, valves, electric box, filter, cooler, etc.The brands for the components can be designated
by customers.We can design, develop and manufacture hydraulic systems for every industry
according to the customer's demands.
1.Electric hydraulic pump.
2.Handle convenient to carry.
3.Easy operation, good performance.
4.High quality with competitive price.
Pressure |
5-21 Mpa |
Material |
45#steel |
Installation way |
Foundation bolt |
Oil type |
Antiwear hydraulic oil |
Temperature |
-30----80℃ |
Motor power |
7.5kw |
Pump |
PV2R2-41 |
Over size |
1100x850x700mm |
Value bank |
Proportional relief value one group |
|
Electro-hydraulic directional control value four groups |
Connected pipe diameter |
1mm |
Fuel tank volume |
40-160L |
Accumulators:
These are containers that can be attached to the hydraulic actuators. They collect water form the
pumping mechanism and are intended to build and maintain fluid pressure to supplement the motor
pumping system
Motor Pumps:
A hydraulic power unit can be equipped with a single motor pump, or multiple devices each with
their own accumulator value. With a multiple pump system, usually only one operates at a time.
Tanks:
The tank is a storage unit designed with enough volume for the fluid in the pipes to drain into it.
Likewise, actuator fluid may sometimes need draining into the tank.
Filters:
A filter is typically installed along the top of the bank. It is a selfcontained bypass unit, with its
own motor, pump, and filtering apparatus. It can be used to fill or empty the tank by activating
a multi-directional value. Because they are self-contained, filters can often be replaced
while the power unit is functioning.
Coolers and Heaters
As part of the temperature regulation process, an air cooler can be installed near or behind the
filter unit to prevent temperatures from rising above operational parameters. Likewise, a heating
system, such as an oil-based heater, can be used to elevate temperatures when necessary
Power Unit Controllers:
The hydraulic controller unit is the operator interface containing power switches, displays, and
monitoring features. It is necessary for installing and integrating a power unit into a hydraulic
systems, and can usually be found wired into the power unit.
Power Unit Controllers:
The hydraulic controller unit is the operator interface containing power switches, displays, and
monitoring features. It is necessary for installing and integrating a power unit into a hydraulic
systems, and can usually be found wired into the power unit.
Send Inquiry to This Supplier
You May Also Like
-
VOLVO VOE14560206 Oil Seal Construction Equipment in StockUS$ 11 - 12MOQ: 1 Unit
-
Factory Direct 3 Ton Excavator Hydraulic Grapple OEM Custom Tine & Jaw Size | 5 Tine Mini Excavator Demolition Grapple Manufacturer, QC TestedUS$ 800 - 1000MOQ: 1 Piece
-
SDLG Seal Kit for Wheel Loader LG918 J4110002988019 Genuine OEMNegotiableMOQ: 1 Piece
-
Genuine Advance Internal Frictional Disc 7502-019 Gearbox PartsNegotiableMOQ: 1 Bag
-
High-Performance GT2263KLNV Turbo Charger for Hino Engineering/commercial VehiclesUS$ 540 - 560MOQ: 1 Unit
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Water Excavator Sensor Replacement for Wiring Service YNF18013NegotiableMOQ: 1 Piece
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces





