[Xtool] Launch Two Post Trucks Lifting TLT235SB

 Feature

Dual hydraulic cylinders drive, stable lifting and lowering. Adopt two steel cables for equalization, force two carriages to move synchronously.

Function Improvement

Item

Notes on Improvement

Update Date

 The sheave seat of TLT235SB is changed from weld part to casting part

 For decreasing the cost ,the sheave seat will be changed to casting part ,It will not effect the function of the machine.

 2008-12-9

 Unite the holes on the two-post lift

 Unite the holes on the column to simplify the processing,It won,t effect the function of the machine.

 2008-12-2

 Changes of round rubber pad hole position

 Add shims to the installation holes ,Bottom is flat ,add shims to 8 installation holes and flat washer 8

 2008-6-27

 M36 hexagon thick nut of support seat changed

 Accord to the feedback,TLT235SB M36 hexagon thick nut of support seat change to the reguular chamfered edge style,the period of delivery is decreased.

 2008-4-1

 Changes of steel cable for safety lock for series TLT two lift

 According to the customer requests ,we add some retaining rings on the rubber pad supporter in order to protect the cable of one side manual safety lock on AT not to slide off ,The carriage of flool-clear two-post lift can be installerd nore convenient

 2007-11-26

 Increase the shims to the carriage for series two-post lift

 For well-adjust,the list of carriage (except TLT245ST SK2030)adds:TLT235SB shims I for sliding block(galvanization) ,Q235-A,TLT235SB-20-12-A,code:201010987,number:1

 2007-11-5

 Door rubber pad of 2-post lift have been changed

 Door rubber pad reduce weight and add groove

 2007-1-19

 Processing changes for parts

 Change being 1,Round plate adding welding outside zinc coating 2,Push rod adding welding outside prcessing 3,Screw adding outside processing

 2007-1-18

 Change of HP hose

 The length of HP hose is changed form 1440mm to 1240mm

 2006-12-19