Contact Platform Support
Help CenterHigh Quality Tungstern Milling Cutter
Related Products
High quality tungstern milling cutter
we can provide carbide insert for roughing for you as your special specificati
Recommended cutting parameters for carbide inserts :
Grade select for carbide insert:
YBC301:
Combination of hightoughness,high-strength substrate and coating composed of TiCN,thin Al2O3 and TiN.
Suitable for semi-finish and rough milling of P-type material
YBM251:Combination of hightoughness,high-strength substrate and coating composed of TiCN,thin Al2O3 and TiN
Suitable for semi-finish and rough milling of P- and M-type material
YBM253:Combination of high-toughness gradient substrate and coating composed of TiCN and ultrafine Al2O3
Suitable for rough milling of M-type material
YBM351:Combination of high-toughness substrate and coating compoed of TiCN,thin Al2O3 and TiN
Suitable for rough milling of P- and M-type materia
YBD152:Good combination of substrate with high wear-resistance and coating composed of TiCN and thick Al2O3
Suitable for finish and semi-finish milling of K-type material
YBD252:Good combination of substrate with high wear-resistance and coating composed of TiCN and thick Al2O3
Suitable for rough and semi-finish milling of K-type material
YBG102:fine carbide substrate + Nano coating
Suitable for finish and semi-finish milling of K-type material
YBG202:Substrate with excellent deformation resistance + Nano coating
PVD grade with wide application, widely applied in semi-finish milling of P-, M- and S-type material
YBG205:Ultra fine carbide substrate +Nano coating
Suitable for rough milling of M-type material
YBG302:Substrate with good toughness and strength + Nano coating
Suitable for rough milling of P- and M-type material
YBG152:Substrate with moderate hardness and strength + Nano coating
Suitable for rough and semi-finish milling of K-type material
Chipbreaker selection for face milling inserts:
function |
For finishing |
For semi-finishing |
For roughing |
P |
-DF |
-DM |
-DR |
M,S |
-EF |
-EM |
|
K |
-CF |
-CM |
-CR |
AL |
-LH |
||
Cutting edge treatment selection for face milling insert for steel:
Treatment of cutting edge |
Recommended selection |
SP¨¨EDER/L |
Honing edge is suitable for semi-finish and finish machining of steel and stainless steel |
SP¨¨EDFR/L |
Sharp cutting edge is suitable for finish machining of cast iron materials |
|
SP¨¨EDSKR/L SP¨¨EDS¨¨R/L |
After chamfering and honing, the edge has strong anti-breakage capability, suitable for rough machining of steel parts under poor working conditions |
|
SP¨¨EDTKR/L SP¨¨EDT¨¨R/L |
Chamfered edge is suitable for semi-finish and finish machining of steel, stainless steel and cast iron materials. |
SP¨¨EDR/L-GM |
3D chipbreaker can reduce cutting force, reinforce the capability of chip control, and improve insert life. It is widely applied in semi-finish machining of steel, stainless steel and cast iron materials. |
Recommended combination of grade and chipbreaker
Send Inquiry to This Supplier
You May Also Like
-
SecoCNC Carbide Inserts LCMF 160304-300-MTANegotiableMOQ: 10 Blades
-
Turning ToolNegotiableMOQ: 2500 Pieces
-
Carbide Insert Plastic Grid Box Tube Packaging With Plastic LidsNegotiableMOQ: 1 Piece
-
9pcs Indexable Carbide Turning Tools Set Inserts With Holder for Mini LatheNegotiableMOQ: 1
-
Professional Maufacturing KMJ-1914 Good Performance CNC Milling Cutter ,CNC Machine Turning ToolsNegotiableMOQ: 100 Pieces
-
Ceramic Cutting ToolsUS$ 10 - 100MOQ: 100 Pieces
-
Precision Cnc Turning Lathe Parts Custom Turning LatheUS$ 0.1 - 10MOQ: 10 Pieces
-
Tobacco Leaf Machine BladeUS$ 1 - 20MOQ: 10 Pieces
-
Insertion ToolsTUS$ 0.1 - 1.5MOQ: 5000 Sets
-
CNC PCD Diamond Cutting Tools InsertsUS$ 2 - 40MOQ: 10 Pieces
