ALL CATEGORIES

Ultrasonic Print Head Cleaner for Solvent Print Head

Name: Ultrasonic Print Head Cleaner for Solvent Print Head
Brand: Brightness
SKU: 121980109
Availability: InStock

US$ 330 - 360 MOQ: 1 Set

Key Specifications

Place of Origin:

Guangdong, China

Brand Name:

Brightness

Model Number:

Shenzhen Brightness Electronics Technology Co., Ltd.

Payment & Shipping

Payment Methods:

Port of Shipment:

ShenZhen

Delivery Detail:

Delivery time depends on order quantity.

Place of Origin Guangdong, China

Brand Name Brightness

Model Number LD

Specifications

1.Ultrasonic print head cleaner
2.For solvent & eco-solvent print head cleaning
3.

Ultrasonic Print Head Cleaner for Solvent Print Head

Ultrasonic print head cleaner is mainlly used for the cleaning of outdoor print heads,

Such as Epson, Spectra, Seiko, Konica, Xaar 128/300/500 etc.

In addition, it can clean indoor print heads, like 600 print heads, 1200dpi print heads etc.

And the cleaning of indoor print heads is more efficient than the little ultrasonic head cleaner(the picture above).

Versatile print head cleaner is your best choice for the efficiency and little damage to the print heads when cleaning.

Ultrasonic Print Head Cleaner Parameter

Ultrasonic power- ------50W

Ultrasonic frequency----40KHZ

Clean efficiency- -------- 99%

Automatic cleaning, max clean 4 print heads once

Print Head Cleaner Machine Input electricity--------- AC220V+-10% 50Hz

Ultrasonic Print Head Cleaner Operate

Step1 Open the bottom lid of the machine and the lid of cleaning fluid tank
Step2 Pour cleaning fluid into the cleaning fluid tank.. The minimum should be over the water outlet port of the tank
Step3 Cover the cleaning fluid tank lid .and then the bottom lid of the machine
Step4 Open the top lid and put onnozzle holder
Step5 To connect the inlet of print head to the flushing pipe
Step6 To insert the print head into nozzle holder
Step7 The inserted print head
Step8 Pour cleaning fluid into the cleaning tank ,to close to the water outlet port
Step9 Press the red bottom to start theultrasonic cleaning
Step10 Press the nozzle holder by hand ,so that the nozzle can be immersed in cleaning fluid.
Step11 Release the nozzle holder after ultrasonic cleaning about 3 min. Then press the corresponding green buttom to rinse the print head
Step12 Repeated cleaning for several times.and Cleaning the print head again after changing the cleaning fluid . Until the cleaning fluid which jet from the nozzle is neat and clean. Then re-install it on the printer after cleaning up the print head