Made-in-China high quality cap heat press machine

Specifications

1 Made-in-China high quality cap heat press machine
2 can print different images on cap
3 heater size:8.5*14cm

Made-in-China  high quality cap heat press machine

 

Color:Silver Grey
Size (L W H):400*270*390mm
 Weight: 17Kg
Voltage: 220V or 110V
Power:400W
Temperature Range:0-399 °C

Timing Range:0-99 Sec.
Pressing Size : 14X8.5cm

temperature (can test to find the most suitable )	time(can test to find the most suitable)
cap (cotton)	190°C	18~30
cap(polyester)	200°C	40

 

Materials needed for cap heat transfering

for printing the picture you want, you need:

Epson printer, CISS(continue ink supply system) transfer paper(for cotton cap)/ sublimation paper(for polyester cap or less than35% cotton cap),sublimation ink.

Then you can use thermal tape to stick the picture on caps and use the machine to heat transfer.

 

The time and temperature setting  for  cap heat press machine:

 

1.     press the mode key once, see the “set light” turning red. Press the plus  or minus key to set the initial heating temperature.

 

2.     press the mode key for the second time, see the “temperature light” turning red, Press the plus or minus key to set the highest heating temperature.

 

3.     press the mode key for the third time, see the “time light” turning red, Prees the plus or minus key to set the proper heating time.

 

4.     press the mode key for the fourth time ,finish the setting and the machine stands by to work.