Contact Platform Support
Help CenterHigh Brightness Led Tube Light Circuit Diagram
Related Products
-
T8 600mm LED TubeNegotiableMOQ: 5 Pieces -
1200mm 16w T8 LED TubeNegotiableMOQ: 5 Pieces
-
High Power 35w 1200mm T8 LED TubeNegotiableMOQ: 5 Pieces
-
With Cetification CE,ROHS,UL Insolated Driver T8 LED TUBE LIGHTNegotiableMOQ: 5 Pieces
-
CE,ROHS,UL Isolated Driver 60cm Frosted t8 Led Tube LightNegotiableMOQ: 5 Pieces
Specifications
led tube light circuit diagram1) t8 led tube
2) Certificate:CE,FCC,PSE,ROHS
3) Warranty:3 years
4) Voltage:85~265VA
LED tube light Features:
1. Good heat dissipation: Use high thermal conductivity aluminum alloy as the main heat dissipation, good heat dissipation performance
2. Easy replacement: Replace the traditional thbe light directly
3. LED sources: Applied with the highest-level LED, low brightness, attenuation and lifespan is over 50000hrs
4. Optional multi-input voltage: Wide-voltage design AC input voltage.
5. Environmental protection: No any harmful radiate specrums such as UV or infrared ray included
Specification:
1. Power: 10W/14W/18W/20W
2. Dimension 600mm/900mm/1200mm/1500(length), 26mm(diameter)
3. Dip LED quantity: 144/192/288/300PCS
4. Luminous flux: 700/1100/1600mm/1800lm
5. Input voltage: AC85-265v
6. Luminous efficiency: 80-90 lm/w
7. Working frequency: 50-60Hz
8. Ambient temperature: -20-85degree
9. Ambient humidity: More than 65%
10. Color rendering index: 70-84ra
11. Power factor: More than 0.95
12. Constant current error: Less than 2%
13. Microwave/noise: Less than 240mv
14. Static power: Less than 0.1w
15. Color temperature: 3000-20000k available, such as warm white: 3000-3500k, day white: 6000-6500k, cold white: 6500-7000k.
16. Other color available: Red, green, blue, yellow, RGB etc,
17. Adopt super brightness dip or SMD(3258) LED as light source, chip brand:Epistar (made in Taiwan)
18. Material: Aluminum alloy + PC(clear PC, frosted PC and strip PC available)
19. Packing 25PCS/CAT
Installation:
Standard installation: Connect directly to AC power, this is the most saving enrgy mode
Replacing installation: If there is a starter on the old fluorescent light fixture, remove the starter.
Remove electronic ballast: If there is no starter on the fluorescent light fixture, remove the electronic ballast.
Attention:
Please use and install according to the instructions.
Do not hit or press with heavy substance
Please handle and transport gently.
Do not twist the light when power is on.
The warm light tube is normal when the power is on
Do not touch the lamp when power is on.
Send Inquiry to This Supplier
You May Also Like
-
High Power UL/ TUV /CE&Rohs LED Tube T10US$ 10 - 35MOQ: 5 Pieces
-
High Quality SMD 2835 Epistar 18W T8 LED TubeUS$ 3.6 - 10MOQ: 10 Pieces
-
High Quality T8 Fluorescent LED Tube ConnectorsUS$ 1.5 - 4MOQ: 5000 Pieces
-
LED Tub Bath LightNegotiableMOQ: 2000 Pieces
-
Remote Control Color Changing LED TubeNegotiableMOQ: 1000 Pieces
-
LED Tube T8 18WNegotiableMOQ: 500 Pieces
-
54 Watt T5 Fluorescent HO 3000K LampUS$ 5 - 10MOQ: 1000 Pieces
-
SCHUCH LED LightingNegotiableMOQ: 1
-
2015 New Waterproof SMD3528 LED Light TubeUS$ 5 - 19MOQ: 100 Pieces
-
Gas Station Canopy Light Led,high Brightness!!!US$ 150 - 300MOQ: 1 Piece
