Laboratory Four Rows Magnetic Stirrer

  Four Rows Magnetic Stirrer

1 Introduction

The instrument is designed for mixing in schools, laboratories or factories. This device is not suitable for using in residential areas.

2 Characteristics

1. Stainless shell cover makes sure long time use.
2. Beautiful surface and easy operate.
3. Four points can be stirring at the same time.

3 working condition

  Ambient temperature: 5~40°C;

  Ambient humidity:≤90%;

  Voltage: 220±22v / 50±1Hz

4 Main technical parameters

5 Operation instructions

1. Place the equipment on level worktable, and then put the container with liquid inside into heating jacket.
2. Switch on the power accords with the machine, turn on the knob clockwise, then the working indicator light will be lighten; in the process of regulating, the light intensity changes according to different regulation position, and the temperature rises as well, turn the knob anticlockwise to adjust the stirring speech down.

6 Usage notes

1. When working, ware the personal guard to avoid the risk from:

-     Splashing and evaporation of liquids

-     Release of toxic or combustible gases.

1. Set up the instrument in a spacious area on an stable, clean, on-slip, drying and fireproof surface, do not operate the instrument in explosive atmospheres, with hazardous substances or under water.
2. Ensure that the mains power supply cable does not touch the heating base surface. Do not cover the device.

7 Fault analyses

- Instruments can't be power ON

Check whether the power cable is plugged

Check whether the fuse is broken or loose

If these faults are not resolved, please set the instruments to factory default setting, or take the unit to your technical service center, or contact with the manufacturer.

8. Storage and transportation

Keep it in dry and clean room with good ventilation and no corrosive gas, prevent it from wetting by the rain and avoid violent collision in transportation.