Contact Platform Support
Help CenterConstruction Chemical Mortar Early Strength Agent/accelerator
Related Products
-
New Mortar Early Strength Agent/accelerator Instead of Lithium SulfateUS$ 13 - 15MOQ: 100 Kilograms -
Additive of Concrete Early Strength Agent Well Instead of Lithium Sulfate (Li2SO4) Industry GradeUS$ 12,000 - 15,000MOQ: 1 Ton
-
Outdoor Pervious Concrete Polymer Admixture for Low-volume PavementsUS$ 1,600 - 1,700MOQ: 1 Ton
-
Construction PVA Polyvinyl Alcohol for Tile Adhesive MortarUS$ 1,850 - 1,850MOQ: 1 Ton
-
PVA Polyvinyl Alcohol as Substitution of Vinyl Acetate EthyleneUS$ 1,850 - 1,850MOQ: 1 Ton
construction chemical mortar early strength agent/accelerator
SETAKY®XZQ-01is an early strength agent powder produced by spray-drying after reactive synthesis, mainly based on sodium-based soluble salt, calcium-based soluble salt, etc, and used for cement-based dry mix mortar which needs high early strength, it can be an extra choice of lithium carbonate and ithium sulfate.
Picture
Specifications of construction chemical mortar early strength agent/accelerator
Appearance |
white or slight yellow powder, no agglomeration |
Solid content |
≥95.0% |
Bulk density g/L |
550−750 g/l |
40 mesh pass rate |
≥98.0% |
pH value(20% water solution) |
7-9 |
Application range
- Floor mortar
- Self-leveling compound
- Grouting material
- Repair mortar
Key properties
- Safety,
- Good spread ability and water solubility
- Short duration of mixing
- Good early strength, and no effect on long-term strength.
- Better performance with same dosage of lithium carbonate or lithium sulfate.
- Improve the shrinkage and creep of the mortar
- Good adaptability with other additives.
Indicated Dosage
3‰-6‰, we suggest test in lab before the final application for the best dosage.
Packaging and Storage
A. Standard Packing: In 25kg barrel.
B. Other special packages are possible on request.
Sealed storage in a cool, dry place below 30°C and protected against humidity, direct sunshine and rain.
About Setaky
Xindadi Group is a professional manufacturer of building admixture and mortar products from China, specialising in researching, developing and producing of RDP, superplasticizer, HPMC, water repellent, PP fiber, self-leveling compound, adhesive mortar, permeable concrete, etc. We are one of the biggest RDP production base in China with annual output of 36000MTS.
NOTE: FREE SAMPLES ARE PROVIDED FOR TESTING, IF ANY NEEDS, JUST CONTACT ME FREELY!
Send Inquiry to This Supplier
You May Also Like
-
Concrete Admixture Material For Strong SolidificationUS$ 450 - 480MOQ: 20 Metric Tons
-
Self-leveling Compound AcceleratorUS$ 13 - 15MOQ: 100 Kilograms
-
Jiangxi Anchoring Agent - Fuzhou Anchoring Agent - Jingdezhen Anchoring Agent - Nanchang Anchoring AgentNegotiableMOQ: 0 Ton
-
Polycarboxylate SuperplasticizerNegotiableMOQ: 22 Barrels
-
Sulfonated Melamine Formaldehyde Superplasticizer SMF 10 Melment F10 for Gypsum & Concrete AdmixtureNegotiableMOQ: 1 Metric Ton
-
Naphthalene Sodium Naphthalene Sulfonate Superplasticizer for Coal Slurry Additive/Cement Gypsum, Snf/FdnUS$ 750 - 950MOQ: 5 Tons
-
Dispersant NNOUS$ 300 - 550MOQ: 1 Ton
-
Redispersible Polymer AP2080 for Tile AdhesiveNegotiableMOQ: 1 Short Ton
-
Commercial Self-Leveling Cement for PVCCNY 1200 - 2000MOQ: 1 Ton
-
Hydroxyethyl Methyl Cellulose HEMCUS$ 1 - 2200MOQ: 1 Metric Ton
