Contact Platform Support
Help CenterStainless Steel Automatic Rendering Machine/wall Painting Machine/plastering Machines for Sale
Related Products
-
Radiator Hose LN85 LN86 LN106 LN107 LN111 16571-54270 16571-54310US$ 1 - 3MOQ: 1 Piece -
High QualityB5 TPEE CV BootUS$ 1 - 4MOQ: 500 Pieces
-
Head Rotor 146402-1420 Used for 4BE1 EngineUS$ 2 - 60MOQ: 20 Pieces
-
Rear Facing Car Seat Baby MirrorUS$ 6 - 10MOQ: 1000 Pieces
-
TOYOTA Yaris/MR2/Camry 12V Voltage Toyota Relay 90987-04006/156700-1580US$ 5 - 30MOQ: 100 Pieces
Wall Plastering Machine HX-1 small
| Model | HX-1 SMALL |
| Dimension | 720*830*680mm |
| Weight | 140kg |
| Power | 220v |
| Plastering thickness | 2mm-30mm |
| Rendering speed | 500M²/8H |
| Rendering height | 3.5M |
| Voltage | Customizable |
Application Scope
It is the best choice to trowel the cocrete wall,The brick-concrete wall,the cavity wall,the light brick wall and the baking-free brick wall in the office building,the residential building and the civil house with hard floor in it.It can apply the limestone plaster,the stone powder plaster,the concrete plaster,the foaming sandplaster,the dry powder plaster,the gesso plaster,etc.It can work normally only if the plasterig thickness is not more than 3cm and te plsterig height is not more than 5m.
Desigh for Prot
1,If the trowel is not at the plastering angel,even if you press the starting switch, the machine doesn't start in order to avoid the damage of the trowel.
2,When starting,if the motor turns in the opposite direction,the power will be cut off automatically so as to keep the hoisting cable in good order.Turn the reversing switch for phase commutation,then the motor starts.
3,If the machine is held up while goin down,the power will be cut off automatically to keep the hoisting cable in good order
4,Replace a new one in time when the surface of the hoisting cable is not smooth.In case the cable is braken, the machine will stop when it goes down 20cm at the abnormal speed.
5,All the turning joints and all the fastening screws are stain proofing.All the bearings are sealed in multi-layer.And all theaccessories are made in the best domestic enterprisec.We try hard to build the most useful, efficient and advanced machine in the world.
6,The front part is much heavier than the rear part.Even if the hydraulic device doesn't work suddenly,the machine won't fall backwards.It is safe to use.
Contact details
email:sy07 AT
Skype: gtai
Wechat:1056520285
Trade manager:cn1500109134
QQ:767585328
Tel:+86-319-5232233
long-term partner relationship is our goal!
Send Inquiry to This Supplier
You May Also Like
-
ZB800-6A Wall Plastering Machine PriceUS$ 1,000 - 4,280MOQ: 1 Piece
-
Automatic Rendering Machine Wall Rendering MachineUS$ 1 - 10MOQ: 1 Set
-
SINCOAL Rendered Wall MACHINE With High-efficiency FROM CHINA.US$ 11 - 55,555MOQ: 1 Set
-
Best Quality Automatic Wall Plastering Machine for SaleUS$ 2,000 - 3,000MOQ: 1 Set
-
High Efficient Automatic Grease Lubriing Rendering MachinesUS$ 100 - 600MOQ: 1 Piece
-
Muti Purpose Oil Paint Spraying Coating MachineUS$ 1,650 - 1,800MOQ: 1 Set
-
2016 New Design Machine for Plastering WallUS$ 1,900 - 2,800MOQ: 1 Set
-
Internal Automatic Wall Plastering Machine for SaleUS$ 2,500 - 4,000MOQ: 1 Set
-
TYMP-1300 Automatic Mortar Plastering Robot Interior Wall Plastering Leveling MachineNegotiableMOQ: 1 Case
-
Wall Plastering Robot Mortar Plastering Robot Wall Plastering Robot SupplyUS$ 4300MOQ: 1 Combo
