Chlorine Dioxide Generator (CPF-D2) For Water Treatment Equipment

CPF-D2 series ClO2 generator is a kind of positive pressure and automatic residual-chlorine-control disinfecting system. It is adopted Positive Pressure dosing technology for the first time in the world. It can brought disinfectant solution directly to the pressured water with simple, safe, reliable, stable operation and other characteristics. It can automatically adjust the dosage of clo2 solution through value of residual chlorine provided by the residual-chlorine-on-line control system.

Structure:

The way of clo2 producing:

5NaClO2+4HCl = 4ClO2+5NaCl+2H2O

Use of raw materials:

Sodium Chlorite: 18.5% Sodium Chlorite solution

Hydrochloric Acid: 15% Industrial Hydrochloric Acid

More ratios are available

Technology:

Use sodium chlorite and hydrochloric acid as raw materials, transmission of raw materials through two metering pumps to the reactor, produce the concentration of more than 95% of high-purity chlorine dioxide solution added to water for disinfection. It can automatically adjust the dosage of clo2 solution through value of residual chlorine provided by the residual-chlorine-on-line control system. When lack of raw materials, the liquid level alarm system will give audible and visible alarm signals and automatically cut off the power supply of equipment. Raw materials conversion rate is more than 95%.

Main parameters:

Working temperature: 5 ~ 40 degrees Celsius

Operating voltage: 220V plus or minus 10% / 380V plus or minus 10%

Operating current: <5A

There should be no strong electric field and magnetic field interference around equipment.

Maximum pressure of water-pipe-line: <0.7Mpa

Function:

Residual-chlorine-dioxide-on-line control / manual control

Low liquid level alarm of raw materials

Linkage with water pump

Model:

Remark: The model above-mentioned is commonly used. We will serve our clients with exceptive products according to their special orders.