48W 60x60 cm led panel lighting

Specifications

60x60 cm led panel lighting
1.CE & ROHS Approved
2.600*600mm 48w 2700lm SMD 3014
3.3 Years Warranty
4.13mm Thickness

60x60 cm led panel lighting

 

Specification:
Light source SMD low power LED(single color:3528,RGB:5050) 320pcs
Luminous Flux >2700lm
CCT 2700-3500K,4000-5000K,5700-6300K
Color White,Warm White,Red,Green,Blue,RGB
Power consumption 48W
Input voltage AC85-265V
Color rendering index >80Ra
Material  Aluminum frame edge with LGP(PMMA)
Waterproof grade IP40
Light efficiency >80%
Electrical source efficiency  >85%
Power factor >0.95
Working temperature -20-+50degree
Working voltage DC24V
Beam angle 120 degree
Aluminum frame width 21.5mm
Life-span >50,000hours
Size:L600*W600*H13mm
Installation ways built-in installation, mounted installation, suspended installation

 

LEDS Lumen Attenuation:

 

 follow LED panel light for your reference:

1.Round 6 inch(Dia.200*17mm)LED panel light:with adapter,AC100-240V,8W, 540 lm

2.Round 4 inch(Dia.144*17mm)LED panel light:with adapter,AC100-240V,6W,320lm

3.square 184*184 *18mm:with adapter,AC100-240V,7W, 500 lm

4.600*600*13mm:with AC100-240V,38W,2000 lm

5.300*300*13mm:with AC100-240V,18W,1200 lm

6.300*1200*13mm:with AC100-240V,40W,2300 lm

7.300*600*13mm:with AC100-240V,20W,1500 lm

8.600*1200*13mm:with AC100-240V,65W,4200lm

 

Advantage:

1.The simple dynamic control on brightness and color. It can fully satisfy the market requirement on high-quality indoor decoration atmosphere , which is one of the best advantage that LED owns at present in comparison to the traditional lighting sources.
2.The external dimension is small. LED can fulfill the organic amalgamation with architectures, reaching the effect of only lighting without lamp. Meanwhile, it is convenient to reach varied gentle shape, which has brought a new thought for lighting design of indoor space.
3.Long life-span. The LED with good heat elimination has the actual usage lifetime several times even dozens of times of the general used lighting sources. It has an extra advantage in the spot where it needs to be brightened for 24 hours and the maintenance and replacement are not convenient.
4.It has no infrared or ultraviolet radiation in light beam. It is especially applicable to museum, art gallery, library, cosmetic shop, jewelry shop on display lighting.
5.The LED panel light has strong irradiation direction. It has high usage rate of luminous flux, and small volume.
6.Energy save and environment protection. In color lighting filed, LED has embodied its apparent advantage in energy save. In the filed of indoor white lighting, its energy save becomes obvious.
7.No pollution, no radiation, no frequency flash. It is very applicable to modern lighting requirement, providing people with more scientific and healthy lighting environment.
8.The LED panel light have low temperature on the surface. While the traditional lightings have very high surface temperature, it can efficiently avoid fire caused by the over-high temperature of lighting surface.

Installation precautions for LED panel light
1. This product should be installed by trained electricians.
2. Pleas make sure the transformer and the light panel disconnect with the AC main supply.
3. The distance between the light and any flammable materials must not be less than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 2.0cm.The light must not be installed into ceilings or walls that contain heat-insulating material. The main cable must not connect with the low voltage cable or the panel light.
4. When connecting the wiring cables to the luminaries, the brown (or black) wire is the Live wire, connect it with the terminal marked "L". The blue wire is Naughty wire, connect it with the terminal marked "N".
5. Use only the LED driver included, and do not connect the LED panel light to other loads.
6. Please don't disassemble the LED panel light or the power supply or the drive system to avoid any danger to user or problems to the LED panel light.
7. If there is unauthorized disassembly and maintenance, then the LED panel light and the transformer and the drive system will be out of warranty.

Advantages:

1.  Singl color & RGB. Can get fantastic color changing effects.Controlled by dimmer .Colorful lights and easy for installation.

2.  Ultra-thin design conception.New Dimmer!Unique Dimmer!Has two Kinds Of dimmer.

3.  Energy saving, saving 50% than the traditional lights at the same brightness.

4.  Inner high efficiency (95%) heat protection system, with the latest high efficiency  constant  currency driver, making the products can work under unstable voltage.

5.  Instant start, no flicking, no humming.

6.  Professional circuit design, each LED can work separately, thus it can avoid the influence caused by a broken single LED.

7.  Anti-electric wave, no RF interference.

8.  No such hazard as mercury or lead enters the environment.

9.  Long life span, more than 50000 hours

Application:

    Hotels, meeting room, factory & office, residential, institution buildings, hospital, schools. Places where energy saving lighting and high color rendering index lighting are needed.