GYXTW 6 cores,12 cores to 48 cores single mode loose tube fiber optic cable

GYXTW 6 core fiber optic cable Characteristics:

1. Accurate fiber excess length ensures good mechanical and temperature performance
2. High strength loose tube tube that is hydrolysis resistant and special tube filling compound ensure a critical protection of fiber
3. Specially designed compact structure is good at preventing loose tubes from shrinking
4. Crush resistance and flexibility
5. The following measures are taken to ensure the cable watertight:
6. Steel wire used as the central strength member
7. Loose tube filling compound
8. APL moisture barrier
9. 100% cable core filling
10. PSP enhancing moisture-proof
11. Water-blocking material

GYXTW 6 core fiber optic cable Application:

1. Duct
2. Aerial
3. Direct buried

GYXTW 6 core fiber optic cable Brief Introduction

The fibers, either of single-mode or multi-mode type, are placed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.

GYXTW 6 core fiber optic cable Pictures:

1. 
   

   GYXTW 6 core fiber optic cable

2. 
   

   GYXTW 6 core fiber optic cable

GYXTW 6 core fiber optic cable Paramters: