PVC water-proof cloth, wooden box

Specifications

Corrugated wall conveyor belt
1.plies:1-10ply
2:width:100-3000mm
3.thickness:4-50mm

 

One of three methods are used to make belts endless:

1 vulcanized splice 

2 mechanical splice using fasteners or lacing.

3 cold bond splicing. 

 

Standards:

GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc.

Models:

EP Nylon canvas steelcord, pvg,pvc, sidewall conveyor belt

 

 

The physical and mechanical properties of nylon conveyer belt and EP conveyer belt are as following:

 

1. The physical and mechanical properties of coverffig layer: please refer to the physical and mechanical properties of the common conveyer belt.
2. Tensile property of through thickness:
a. The longitudinal tensile strength is not lower than the following nominal value:
315 400 500 600 630 8OO 9OO 1000N/mm
b. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%.
c. Straightness: no more than 25mm.
d. plunger bond strength:

 

Index Description	Strength between layers	Cover layer and fabric layer
		Thickness of cover layer≤1.5mm	Thickness of cover layer >1.5mm
Sample average value	4.5N/mm	3.2N/mm	3.5N/mm

 

 

 

Fabric Material	Fabric structure		Fabric code	No.of fabric plies	Width mm	Length m	Cover thickness mm
	Warp	Weft
							Top	Bottom
Polyester canvas	Polyester	Nylon of Polyester	EP100	2-10	350-2000	10-400	2-12	1-5
			EP150	2-10	350-2000	10-400	2-12	1-5
			EP200	2-10	350-2000	10-400	2-12	1-5
			EP250	2-10	350-2000	10-400	2-12	1-5
			EP300	2-6	350-2000	10-400	2-12	1-5
			EP400	2-6	350-2000	10-400	2-12	1-5
			EP500	2-6	350-2000	10-400	2-12	1-5
			EP600	2-4	350-2000	10-400	2-12