2.4GHz Wireless Timer Remote for Panasonic Lumix DMC

Specifications

1).Wireless timer remote control for Panasonic
2). 2.4GHz FRQ, low interference,high quality photograph

2.4GHz Wireless Timer Remote for Panasonic,JYC JY-710-P1

 

 

Introduction:

• New upgraded wireless timer shutter release, you can not only use it at basic wired timer shutter release, but also can use it as wireless shutter release, so there are two functions for this product, it's more convenience and efficient.
• With 2.4GHz frequency working frequency, it reduces interference and grantees high quality photography

   

Suitable for:

 

Panasonic Lumix DMC
FZ20, FZ20K, FZ25, FZ30, FZ50, LC1, L10, L1

 

 

 Features:

 

• Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds.
• Interval Timer (INTVL)The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
• BULB/Long Exposure (LONG)It allows you to take time exposures up to 100 hours long.
• Exposure Count (N)This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.

Specification:

 

• Timer delay:0s to 99hrs 59min 59s in one-second increments
• Exposure time:0s to 99hrs 59min 59s in one-second increments
• Interval:1s to 99hrs 59min 59s in one-second increments
• Number of shots:1 to 399,-- (unlimited)
• Power source:Two AAA 1.5V LR03 alkaline batteries
• Battery life:Approximately two months of continuous shooting with a delay of 5min, an exposure time of 4min 56s, and an interval of 5min. Use of the illuminator will reduce battery life
• Operating Frequency:FSK 2.4 GHZ,it is suitable to use this free channel in many countries, guarantee of the transfer speed, distance and stability
• Operating temperature: -20°c - + 50°c
• Dimensions: 155mm x 40mm x 18mm 45mm x 35mm x 25mm
• Weight: 202g