Contact Platform Support
Help Center1.75mm 3.0mm Plastic Abs Pla Filament for Diy 3d Printer for Sale Quality Choice
Related Products
-
1.75mm PLA Filament for 3D PrinterUS$ 10 - 40MOQ: 1 Kilogram -
3d Printer Filament 1.75mm ABS Filament 3mm Abs FilamentUS$ 10 - 40MOQ: 1 Kilogram
-
3mm PLA/ABS Filament for 3d Printer,3D Printer FilamentUS$ 10 - 40MOQ: 1 Kilogram
-
015 Hottest PLA 3.0mm 3D Printing Filament Pla 1.75 Filament With 32 Colors Available Quality ChoiceUS$ 7 - 7.5MOQ: 1 Kilogram
-
High Quality ABS PLA 3D Printer Filament for 3D PrintingUS$ 8 - 10MOQ: 1 Roll
1.75mm 3.0mm plastic abs pla filament for diy 3d printer for sale
1.Relative to the ABS, PLA has the following advantages
♦ PLA's processing temperature is low, can be processed at 185 degrees;
♦ odor harmless, good smell like fried corn ;
♦ high strength, high stiffness, suitable for DIY players do duplicate printer components;
♦ forming performance is excellent, thermoforming dimensional stability, low shrinkage (0.3%),layers stick each other well;
♦ brightly colored, translucent color;
For customers, we are free to provide technical information counseling, ensure a smooth PLA used, for the market often reflects the PLA block nozzle solutions and non-stick hot bed.
2.Our advantages
We select of premier grade ABS material, low water absorption, high toughness. Factory direct sales, inexpensive, buy more, bigger discount! !
|
Our PLA |
ordinary PLA |
Type |
3, A(clear natural),B(toughness translucent color,our technical innovation products),C(opaque color) |
A(clear natural),C(opaque color) |
Processing temperature |
185 deg |
210 deg |
Odor |
No smole, taste like fried corn |
No,smoke,taske like fried corn |
Diameter Variations |
1.7-1.75mm, 2.85-3.0mm |
1.65-1.78mm 2.85-3.05mm |
Roundness |
+/-0.03mm |
+/-0.02~0.05mm |
water absorption |
Very low, no bubbles occur when printing even expose to air for over half a year |
High, much bubbles printing at high temperature after the filament opened from seal packaging and exposed to air for a period( like one month or shorter time) |
Surface gloss |
Normal |
Good |
Toughness |
Type A and C is not good toughness, B is good tough |
Not good toughn
|
1.Produce process
♦ Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).
♦ Mix with colors masterbatch or colors powder, all which .certified with ROHS.
♦ Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.02kg
IV we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly.
2.Productiong quality control
♦ we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.
♦ keep each record filament samples sent to customers, build a tracking able document.
♦ when the filament put on shelf longer than half a year, we will dry the filament again.
3.About waste & recycle
Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.
We haven’t produced with scrap outlet, rework&recycle material, or dispose, but for quality assurance purpose.
we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .
| Typical Material & Application Properties (1, 2, 3) | ||
| Film Properties | Ingeo 4032D | ASTM Method |
| Density | 1.24 g/cc | D1505 |
| Tensile Strength MD | 15 kpsi 21 kpsi | D882 D882 |
| TD | ||
| Tensile Modulus MD | 500 kpsi | D882 D882 |
| TD | 550 kpsi | |
| Elongation at Break MD | 180% 100% | D882 D882 |
| TD | ||
| Elmendorf Tear MD | 17 g/mil 14 g/mil | D1922 D1922 |
| TD | ||
| Spencer Impact | 2.5 joules | |
|
Transmission Rates Oxygen Carbon Dioxide Water Vapor |
675 cc-mil/m2-24hr-atm 2,850 cc-mil/m2-24hr-atm 375 g-mil/m2-24hr-atm | D1434 Internal F1249 |
|
Optical Characteristics Haze Gloss, 20º |
2.1% 90 | D1003 D1003 |
| Thermal Characteristics Melting Point | 155-170ºC | D3418 |
1.Service
♦ Quality assurance.
♦ Reply your enquiy in 24 working hours.
♦ Experienced staff answer all your questions in fluent English.
♦ Customized quality is available,OEM are welcome.
♦ Exclusive and Unique solution can be provided to our customers by our well-trained and professional engineers and staffs.
2.Payment accept
♦ Paypal
♦ Bank account wire
♦ Western Union wire
We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box
We also have vacuum heated bag to replace of PE bag, make better avoid moisture.
Q: How about the MOQ?
A: We can accept small order, 100pc can be acceptable, but we can give some discount price for large order.
Q: How about the package
A: We will use 1 filament /spool on seal PE bag with desiccant , then smaller carton, then out big box .
Q: How about the shipment?
A: For sample order, we usually ship by express or by air, for bulk order, we usually ship by sea.
Q: How about the lead time?
A: For sample order, we usually need 2-7 working days, for bulk order, we usually need 12-15days for mass production.
Send Inquiry to This Supplier
You May Also Like
-
Plastic RodNegotiableMOQ: 2300 Pieces
-
PTFE Rod and SheetNegotiableMOQ: 100 Pieces
-
Ribbed Pole,Pole,US$ 4 - 5MOQ: 3000 Sets
-
Rod EndUS$ 0.1 - 10MOQ: 200 Pieces
-
Diameter 5mm-300mm Nylon RodUS$ 1.5 - 4.5MOQ: 100 Kilograms
-
Cheap Acrylic Clear Drapery Acrylic RodUS$ 1 - 5MOQ: 500 Pieces
-
Perfect Quality Flame Resistant ISO Colored Plastic RodUS$ 0.1 - 5MOQ: 1 Piece
-
1.75mm Abs Filaments for PrinterNegotiableMOQ: 32 Kilograms
-
3D Printer PLA Filament Glow in the Dark.US$ 7.8 - 16MOQ: 5 Rolls
-
Uhmwpe Rod Hdpe Rod Hdpe Roller PartsUS$ 2 - 4MOQ: 500 Kilograms
