Contact Platform Support
Help CenterBlack Oxidization Spring Steel Bracket
Related Products
Specifications
1. Qualified material choosed2. Eco-friendly
3. Small MOQ
4. Quick delivery
5. Strict tolerance
Bracket is one of the industrial holders , it is mainly used for hold as well as support somthings , the specific design is according to actual requirement of work pieces , there are many kinds of holders or brackets ,like car bracket holder , glass bracket holder , camera bracket holder and TV bracket holder .
This bracket holder is designed in a socket and a thin metal piece , there is a small hole on the each of side which support like pin , bar etc to through for connection with other pieces .
front of the bracket
Advantage of Bracket holder
1. Good flexibility
2. Enough strenth and ductivity
3. Super anti-rust
4. Long service
5. No any burss
The operation of bracket holder
1. check the dimensions of bracket holder whether are suitable for requirements of fitting
2. make sure no burss or sharp on the edge of bracket holder
3. make bracket holder is in a steady position and hold it in a bolt or other items
4. put objective into the socket of bracket holder
5. fasten bracket holder with the objective .
Optional finishes
1) Zinc .
this is the most popular treatment , the usual color cover black , silver , yellow and white . more colors see below color card .
2) Nickel .
this is more good finish than zinc and is sole color , many parts are plated also in this finish .
3) Oxidization .
this finish is used for part stainless steel pieces , and the most alumiunm parts .
4) Polish . the parts will be more bright after polished , especially for stainless steel parts .
5) Paint . the color of paint is more abundant , it is more paint in different colors . partial paint and full paint for screws .
6) bronze .
this finish is very few used just for some special pieces .
7) brass .
this finish has a good anti-rust and nice surface but more expensive than zinc .
Material introduction
1. Excellent Flexibility .
Parts are made from super quality spring steel , this kind of material has good elastic deformation , which can keep the original shape long time even there is much loading during service .
2. High Strength .
Parts were formed and then must be quenched in 400 degree x 15 minites and anti-fatigue is up to 240 Mpa .
3.Perfect stability .
Inside components and instructure of part are reformed after quenching , keeping this status long time , and that make part satisfied expect requirements .
4. Good heat resistance .
Spring steel part can be worked smoothly under 500 degrees surroundings , so , which is the ideal choice for part that in bolier , car , steam valve etc .
5. Low cost .
As spring steel is easy to make and full automated production ,
6. Easy to oparation .
Simple structure and strict tolerances.
7. Nice appearance .
Parts were plated after forming and also can be coated different colors based on request of fittings .
8. Enviroment friendly .
All chemical elements and surface treatment are meet for the relative standards .eg , GB , ROSH etc .
9. Resistance of oxidation.
Part with “V”chemical element , and also can do oxidize surface treatment to improve resistance for oxidation .
FAQ's
Q. How about your capacity ?
A. With scale of ten thousand square meters , different processing machines , we are able to finish up to 2000 tons raw material every year , generally , one full 20 feet container ( about 20 tons) can be done in 20- 25 days .
Q.How long I can get samples for approval before placing order ?
A. Let you get and confirm samples in first time is our reponsiblity and pleasure , just in one week for new samples that need to be done in new tools , and we can deliver samples within 24 hours for exsiting samples once received your request .
Q.What are your popular payement menthods ?
A. T/T is our prior choose for all , of course , we are also accept L/C , Westunion , paypall .
Q. What products you produce ?
A. We are producing different screws like self tapping screw , machine screw , wood screw , stainless steel screw , self drilling screw , security screw , locking screw and taptite screw etc , and metal stamping parts like bracket and so on .
Send Inquiry to This Supplier
You May Also Like
-
BracketNegotiableMOQ: 2600 Pieces
-
Custom Metal Welding Bracket Fabrication For MachineryUS$ 0.1 - 0.1MOQ: 100 Pieces
-
Nickel Plated Metal Furniture Angle Corner BracketsNegotiableMOQ: 1 Piece
-
Twin Slot Metal Bracket for Pipe HangingUS$ 0.5 - 0.9MOQ: 1000 Pieces
-
Screw Brackets for Glass Shelf SupportUS$ 0.03 - 0.07MOQ: 1000 Pieces
-
Reflective BracketUS$ 0.2 - 0.5MOQ: 3000 Pieces
-
Plasma Brackets VK/LCD-800NegotiableMOQ: 500 Sets
-
TV Wall Mount,TV Bracket,wall MountNegotiableMOQ: 3000 Sets
-
Steel Stamping Spring BracketUS$ 1.5 - 2MOQ: 1000 Pieces
-
Furniture Supporting Frame/structureNegotiableMOQ: 1000 Pieces
