Trimaran 29 Sailboat

Specifications

Trimaran 29 Sailboat

Trimaran 29 standard equipment

Loa 8.84m

Beam 6.09m

Folded beam 2.55m

Dismounted beam 2.50m

Draft daggerboard up 0.30m

Draft daggerboard down 1.52m

Light weight 1000kg

Berths 1d+3s

Standing headroom 1.78m

Engine 6 to 8 hp

Water 50L

Mast height 11.68m

Mainsail surface 29.00 square meter

Jib surface 16.00 square meter

CE category C

Construction

Vacuum infusion process

Hulls & floats : GRP stitched core epoxy sandwich, lexan polycarbonate windows

Deck of main hull:GRP stitched core epoxy sandwich

Akas :glassfiber and epoxy resin

Exterior painted in white “Allgrip” process Antifouling

Cockpit

 4 lockers under the seats, removable board aft the cockpit,2 lockers in the backrests,tube for the petrol

hose coming out near the engine,2 pushpits with flagpole socket and stern rail gate,1 folding 3 steps

bathing ladder ,fixed ob engine bracket,compass with light,2 rope pockets,deck fill for water tank

Rudder/daggerboard

“daggerboard type”composite rudder fixed on the transom, tiller with 2 cleats, 2 ropes for manoeuvring

the rudder.

Composite daggerboard “fuse type”,2 ropes for manoeuvring it coming back to the cockpit

Rigging

Rotating 11.68m carbon mast,carbon boom,both paint white

 Vectran standing rigging

Running rigging

Polyester mainsail sheet,2 polyester jib sheets , Dynema mainsail halyard , Dynema jib

halyard ,polyester spinnaker ,1 polyester mainsail foot , 2 Dynema reefing lines ,2 polyester shround purchases

Sails

Jib pentex +/- 16square meter hanked

Mainsail pentex +/- 29square meter with 2 reefing lines

2 trampolines with lashing rope.

Deck fittings

Main hull:

Aluminum folding struts, bow shroud plate, towing round st.steel U-bolt ,stainless steel pulpit,4 st.steel

cleats , anchor locker, 2 vertical turning blocks for draggerboard manoeuvring, st.steel ball mast base,2

jib tracks with car .2 sets of mast base blocks 2×4 sheaves deck organizers,2×4 clutches, 2 st.steel 2

speed self tailing winches, 1 pair of inner shroud plate,1 mainsail track with single toggle car , 1 pair of track end fitting wit cleat ,1 bowsprit provision

On each float/2 beam:

Bow round st.steel U-bolt,st.steel chain plate, 3 round access plates ,1 opening hatch ,2 round st.steel

U-bolt

Navigation lights

1 LED bicolour navigation light on pulpit, 1 stern navigation light on pushpit,1 360°mast top light

Companionway

1 sliding entrance hatch,2 wooden closing boards, hatch locker rotating2 steps companionway

Electricity

Electrical panel with 8switches, protection by fuses, 70A battery , cable,ignition switch

Navigation area

Chart table with opening chart storage space,1 cabinet above, 1 ceiling light.

Saloon

Folding table,wooden antiskid floor,2 settees with cushion and back rests,4 storage spaces in the back

rests, 2 single berths 200×70cm+one under the cockpit floor, XXL water tank under the seat, 1 ceiling

light, 1 manual toilet

Galley

Stainless steel sink ,hand or foot pump,3 storage spaces , 1 cabinet above, 1 ceiling light,1 through

hull fitting with hose and valve

Fore cabin

190×130 berth with cushion, large storage locker under the berth.50×50 opening hatch, 1 ceiling light

Miscellaneous

1 winch handle 1 electric bilge pump

Stow capacity: 1pcs/40ftHQ with a simple trailer

 CE Certified