Smart and Patent Solar Snake Repeller

Specifications

GH-318 Pantent Solar Snake Repeller

Technique Data:      

Working Theory:

1.Sanke doesn't have anyearhole and auditory system,it creeps and senses the ambient temperature through stretching and shrinking, so the skin is the most sensitive organ of snake.

2. Snakes can sense earthquake very well,when earthquake is coming ,its will escape away very quickly. Such repeller emits a pulsing vibration by the motor, it thinks earthquake and danger is coming, then escape away immediately.

3.Sloar power:energy saving,eco-friendly.

How to use ?

 1. Take off the small plastic stopper under the head of the unit, attach the small connectors on the wires from the base of the head of the unit to the one from the spike section, and attach the spike to the head of the unit.

2. Insert the spike into the ground paying attention not to damage the unit. The spike should be firmly planted while leaving the base of the head minimum 1-2” above the ground. We suggest use a crowbar to first make a small hole and gently push the spike in or dig a small hole and backfill with earth after the unit is in place. Do not use a mallet, hammer or excessive force as this may damage the unit. As long as you can get the unit 2/3rds of the way into the ground with firm ground contact, is good.

3. You can tell the unit is operating, as its led light will flash as it transmits its signal, you will feel the vibrations.

4. Sometimes the unit may need a short time in the sun to give them a boost and start up, when first installed. If the unit stops operating check/change the battery to see that it is OK – as this is the usual reason for the units to stop operating.