HIGH SPEED PIPE CUTTING AND BEVELING MACHINE;TUBE CUTTING MACHINE;PIPE BEVELING MACHINE;PIPE CUTTING MACHINE;TUBE BEVELING MACHI

Specifications

            Model: FPCBM-12A

            Performance features

            On-line Performance: good (designed as per the one line equipment of the production line)

            Beveling Capacity: ≤5Min /two pipe bevels (DN200 SCH40)

            Bevel cutting: cutting pipe and two bevels simultaneously.          

            Bevel quality: good

            Cutting surplus: it is unnecessary so the material can be saved

            Mobility: low

            Application: for cutting large amount of pipes with common wall thickness and beveling the -shape bevel.

            Price: higher than other beveling machines

            Technical parameters

            Pipe diameter applicable: DN50~300(φ60~325)

            Pipe wall thickness applicable: 3~18MM

            Materials applicable: carbon steel, alloy steel, stainless steel and cryogenic steel

            Bevel Shape: V

           Structure: a four post suspending structure is adopted. Since it is hollow, the pipe can goes into the machine directly and fixed there. The cutter rotates and cuts the pipe circumferentially.

           Cutting direction: lengthwise

           Driven by: motor

           Clamping system: clamped by cylinder

           Control System: PLC VF control and Touching Screen

           Length-fixing system: a mechanical Length-fixing system could be provided if necessary so as to fix the length of the pipes as well as cut and bevel them with the supporting of the conveying system of the cutting and beveling machine.

           Automatic aligning: A automatic lifting and lowering device is equipped to adjust automatically the center elevation of the beveling machine, so the pipes with different diameters get the same bottom elevation on the production line to get the pipes in/out of the machine easily.

           Conveying system: Cutting and beveling VF conveying systems driven by motor are equipped at front and rear sides of the beveling machine if necessary.