Contact Platform Support
Help CenterCaCO3 Filler Masterbatch
Related Products
-
Vietnam High Quality CaCO3 Filler Masterbatch ManufacturerUS$ 350 - 650MOQ: 1 Ton -
Vietnam Caco3 FillerUS$ 300 - 400MOQ: 1 Ton
-
MasterbatchUS$ 350 - 500MOQ: 1 Ton
-
Best CaCO3 Filler Masterbatch Manufacturer in VietNamUS$ 350 - 600MOQ: 1 Ton
-
Vietnam Masterbatch ManufacturerUS$ 350 - 600MOQ: 1 Ton
Specifications
Viet Nam CaCO3 filler masterbatch to reduce the cost -100% virgin Sabic polymer carrier. You can dossage at 50%
We are exporters of high reputation and have been for many years in the chemical line.So we are in a good position to serve our customers with the most reliable quality of the line you suggested.
The products have good dispersing and heat resistance,
Also we can make the special goods under your requirements.
AN PHAT CACO3 FILLER MASTERBATCH FOR PE FILM
Item |
Test Method |
Unit |
Result |
Plastic content |
Ash tester |
% |
20 ± 0.5 |
CaCO3 content |
Ash tester |
% |
80 ± 0.5 |
Density |
ASTM D1506 |
g/cm3 |
1.8 |
Moisture |
IR |
% |
≤0.15 |
Particle size |
Caliper |
mm |
1.5 ±0.5 ( CUSTOMER REQUIRE) |
Appearance |
|
|
White Oval |
PRODUCT ADVANCED CHARACTERISTICS
1. This product should be keep out of moisture damp before using;
2. The well mixed masterbatch raw materials and plastic must be used up within 10 hours, otherwise, the dehydration master-batch may lose efficiency because of absorbing the moisture in the air, and it is likely to cause the phenomenon of plugging the filter.
3. As for raw materials with large contents of water, the increase of amount is not recommended, because it may reduce the mechanical properties of the products, we recommend appropriate dry treatment;
4. It is no allowed to carry out dry treatment to the raw materials together with the plastic dehydration master- batch;
5. Before using, check packaging to make sure it is intact or not, unused plastic dehydration master-batch should be heat sealed as soon as possible.
PRODUCT ADVANCED CHARACTERISTICS
1. Improve the anti-heating, rigidity and tightness property.
2. Remove the surface light from plastic products, to get sub-light effect.
3. Improve the surface antifriction and antislip property of plastic products.
4. Reduce shrinkage ratio of final products to Improve stability that size.
5. Reduce fire heating quantity of plastic products second to reduce pollution.
6. Improve surface printing property of plastic to reduce needed electric current under surface corona process.
7. Provide breathe free to film products.
8. Improve heat-conduction property of plastic molding material to reduce period.
9. Reduce the application ratio of white color masterbatch
1.Package, Transportation and Storage
- Packing: 25kg/ bag.
- Note to avoid moisture, isolation and breakage in transportation
- The product is sensitive to moisture. No problem to store in original packing bags. Make sure to use product immediately after opening the packing bags. If it has moisture problem, dry it by hot air recycle machine under 90oC for 30 minutes
2. Shipping:
Within 5-7 days after confirmed deposit or L/C.
Send Inquiry to This Supplier
You May Also Like
-
Wear‑Resistant TPU Granules Covestro 3660DU Virgin Extrusion Grade for Cable Sheath & Tubing ManufacturingUS$ 1.08 - 1.1MOQ: 1 Kilogram
-
DuPont 988PA High Performance Virgin PA66 Nylon 66 ResinNegotiableMOQ: 1 Kilogram
-
Celanese PA66 70G33L DuPont PA66 GF33 Zytel 70G33L NC010 Nylon Resin PA Raw MaterialUS$ 3.1 - 3.4MOQ: 25 Kilograms
-
Fluorocarbon Powder Coating & Epoxy Flake Floor Coating - Chemical Resistant SolutionsNegotiableMOQ: 500 Kilograms
-
Polymers & ResinsNegotiableMOQ: 2000 Bags
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
