Chinese pvc insulated wire and cable high speed automatic cable machine

Chinese pvc insulated wire and cable high speed automatic cable machine

1.pay-off: suitable bobbin:φ500mm—φ630mm. The swing-lever pulleys adjust tension automatically and Tension Belt will brakes when detect wire breaks and the machine will alarm and stop. 

2.Take up bobbin:φ500—630mm iron or rubber axis.

3.suitable wire:φ1.0mm~φ4.5mm.

4.Suitable paper bobbin:φ300 mm×φ50 mm×(8mm~40mm) aluminum foil ,tissue paper,transparent tape,refractory tape,mylar ec

5,Pitch:10mm—90mm adjusts wire diameter and paper width freely

6,Max rotation speed:1800RPM/min.

7 Wrapping speed:max 60M/min(depending upon the wire diameter and paper width ).

8 Hauling Motor:1HP AC motor and inverter control speed.

9,Wrapping Motor:1HP AC motor  and Inverter control speed.

10. power supply:AC 380V 50HZ (three phase)

11. Tension control: 2.5kg magnetic clutch controls take-up tension; The wrapping tension was controlled by tensile Springs.

12 Body:welded by high quality angle Iron and steel sheet, the body is stable and durable.

13. Rotation Unit:The bearings of rotation body are imported famous brands and have been processed by dynamic balance precisely, which ensure the stability of machine in high-speed rotation and can largely improve producing efficiency.

14. Tray: material is high quality Aluminum alloy or reinforced plastic.  After dynamic balance processing, it’s quiet, steady and easy for use.

15,Rotation Axle: The material is 45# steel, which goes through the three processes: rough hammer, anneal and lathing. All assistive parts and key slots are hardened, prevent damage when install or uninstall.

16,Pulley:all pulleys are electroplated by hard chrome, which are lubricous and durable, and prevent wires breaking and ensure product quality.

17.Solo function and joint Control:The joint control means that the hauling machine and wrapping system are operating and stopping synchronously. When in solo function, hauling machine and wrapping system are operating alternatively, which is easy for checking the function of each part.

18. Wiring:φ20mm bearing Traverse (modeled on German type),the amplitude and distance can be adjusted manually.

19.Fix and discharge bobbin :Push into from incline,safe and convenient.

20.Dimension:750mm(L)×597mm(W)×1650mm(H).

21.Coating:Apple Green/off-white(or customer made).