Contact Platform Support
Help CenterPhotoemulsion for Fabric Printing
Related Products
-
Pigment Thickner the Textile AgentUS$ 10 - 20MOQ: 100 Kilograms -
Thickener for Textile PrintingUS$ 10 - 20MOQ: 100 Kilograms
-
Thickener for Pigment PrintingUS$ 10 - 20MOQ: 100 Kilograms
-
Screen Printing Frame AdhesiveUS$ 10 - 15MOQ: 100 Kilograms
-
Frame Adhesive for Flat ScreensUS$ 10 - 15MOQ: 100 Kilograms
Specifications
photoemulsion for rotary screenmilky white
good drability of printing
suitable for rotary printing screen and squeegee
photoemulsion for rotary screen
Milk white, light blue or pink emulsion, for making rotary screen stencil
good durability of priting and excellent accuracy of stencil making.
suitable for squeegee or magnetic rotary sreen priting machine.
Application:
1, Washing the screen:
Immerse the screen into cleaning liquor for around 10 minutes, take out and rinse with water, then dried at low temperature in an oven. At the same time, prevent the screen from being stained with dirt.
2. Preparing the photosensitive emulsion:
It should be operated under a gentle yellow light( prohibit from operating without opacifying). 40-50ml of photosensitizer solution is added into 1000g of photoemulsion, stir clockwise until to homogenous, stand for 1-2 hours to let off bubbles in a cool and dark place. Thenmaintain the prepared photoemulsion at 5-10 in a constant temperature storage box(A seal cover is needed to avoid skinning)
3. Coating:
300g of the prepared emulsion is added into a clean scraper ring and coated on the clean screen with a speed of 10-12cm/min, then drie at 35-40 and 60% relative humidity in an oven with circle wind and no more than 2 temperature differences.
4. Exposure:
Fixed the coated screen on an exposure machine and fit the manuscript closely
The fit time should be determined after trial. Reference time: 5-8 times on a scanning machine or 1-3 minutes on a stationary exposure machine.
5. Developement:
The exposed screen should develop timely by putting it in water at 5-30 for approx. 3-5 minutes, then washed until patterns appear clearly, then rinse off the leaked emulsion with water under low pressure, and dried at 50-60 in a constant temperature oven.
6. Curing:
Curing the retouched screen at 180 for 2 hours in a constant temprature oven until the film becomes golden, then take out to bind with endring after cooling down.
Above information for reference only.
Model |
Use for |
| SE105 | ROTARY PRINTING SCREEN |
| SE101 | SQUEEGEE |
Send Inquiry to This Supplier
You May Also Like
-
Other Printing MaterialsNegotiableMOQ: 2600 Sets
-
Rubber Plastic Blade ScraperUS$ 1.85 - 3.5MOQ: 1 Piece
-
News Printing PaperUS$ 340 - 390MOQ: 40 Metric Tons
-
M2000 Stitching Head PlateUS$ 1 - 10MOQ: 1 Piece
-
Carbonless Paper With Hole and ClawUS$ 20 - 35MOQ: 100000 Sets
-
Crystal/WT-T01: Crystal Film Acrylic Film Photo Protection Film Cold Lamination Film for Wedding Album Wedding Frame Wall Frame Laminated RollNegotiableMOQ: 1000 Square Meters
-
PP&BOPP Transparent / White / Silver Self Adhesive Film Labels Stock for Food Labels,chemical Label EtcUS$ 0.28MOQ: 20000 Cubic Meters
-
Lucky Cat Car Perfume Car Air Conditioner Outlet Perfume Cartoon Cute Creative Car Fragrance DecorationUS$ 9.03 - 9.04MOQ: 5000 Pieces
-
Aluminum Silk Screen Printing Frame With/Without Mesh High-Quality Printing MaterialsUS$ 10 - 20MOQ: 5 Pieces
-
Hot Stamping FoilUS$ 300MOQ: 10 Cases
