Excellent impact resistance for face milling inserts for around SPKN

Specifications

Excellent impact resistance for face milling inserts for around SPKN

1) Product Introduction:

Grade

K10: It is the first choice for medium to rough machining of cast iron,nodular cast iron and under high cutting speed.It’s also suitable for finish machining of ordinary cast iron.

K20:Suitable for semi-finish and finish turning of cast iron,non-ferrous metals and their alloys and non-metal materials,small-section finish turning ,thread rough turning,cyclone thread tuning,continuous seceon semi-finish milling and finish milling,and reaming,etc.with such materials.

K30: Suitable for rough machining,uough planning,rough milling,drilling ordinary holes and deep holes,reaming of cast iron,non-ferrous metals and their alloys and non-mital materials with uneven surface as well as intermittent cutting.

P10:Suitable for rough,semi-finish and finsh turning of carbon steel and alloy steel during continuous cutting,finish turining and cyclone thread turning during continuous cutting,continous surface semi-finish and finish milling,rough reaming and finish reaming of holes.

P20:Suitable for rough turning during cutting carbon steel and alloy steel with unevn surface and continuous surface,semi-finish and finish turning during intermitten cutting,rough milling of continuous secteon and expansion drilling of the cast holes.

P30:Suitable for rough machining ,rough snaving,semi-finish snaving of carbon steel and alloy steel(including the surface for steel workpieces,punched worpieces and cast workpieces)wih uneven surface and during intermittent cutting,rough milling and drilling of mon-continuous surface.

P25:Suitable for rough turning milling and shaving of carbon steel ,cast steel,high manganese steelhigh strength steel and alloy steel.

M10:Suitable for machining difficult steel materials,such as heat resistant steel,high manganese carbon steel,stainless steel,as well as ordinary steel and cast iron.

M20:High manganese carbon steel,stainless steel,high grade alloy steel,as well as ordinary steel and cast iron.

2) Advantages:

duced with advanced German equipments and perfect workmanship

2.We are good at process.Every pieces would do it,not Batch processing

3. Long use lifetime and stable performance

4.Good quality with competitive price

Our German Equipment

3)Other Main Products:

Aluminum turning inserts

Commonly used models:CCGX ,DCGX ,TCGX ,VCGX ,SCGX ,SEHT,APKT.

Turning inserts

Commonly used models:CNMG ,SNMG ,TNMG ,CCMT ,WCMX ,DNMG ,SNUN ,TNGA ,

TNUN ,WNMG ,DCMT ,RPMT

Cermet and Ceramics inserts

Commonly used models:

SEKN ,SPKN ,SPRN ,SEEN ,TNGG ,CNMG ,SNMG ,TNMG ,CCMT ,DNMG ,WNUN ,

WNMG

Milling inserts

Commonly used models:

SEKN ,SPKN ,RDKW ,RPMW ,TPCN ,TPKN ,TPAN ,APKT ,APKT

4) Company Brief Introduction: 

Zhuzhou XinhuaCemented CarbideIndustry Co.,Ltd is a large manufacturer and exporter for cemented carbide and cermet inserts(such as:milling inserts,turning inserts and Aluninum inserts and so on)in China. Our factory set up more than twenty years,and there have a abundant of experience to manufacture the cemented carbide inserts.Our produces sell well in Suoth America,EU ,Asian and so on.

“What should I do?I haven’t found the insert type in your Ablibaba”.It doesn’t matter,we can according to your request to manufacture the inserts.

Zhuzhou Xinhua Carbide Industrial Co.,Ltd.,aiming at international up-to –date level,has always focused on upgrading its technology and reinforcing its management.

If you have anything unclear,pls send the inquiry to us,we will reply you with the first time.Thank you!