Contact Platform Support
Help CenterSand Blasting Grit Steel Shot S460/1.4mm/cast Steel Shot
Related Products
-
Removal of Old Coatings /blasting Treatment Cast Steel Shot AbrasiveUS$ 550 - 650MOQ: 1 Ton -
Abrasives Cast Steel Shot Ball for Descaling the Steel PipesUS$ 600 - 850MOQ: 1 Ton
-
Sand Blasting Grit Cast Steel Shot S110 With SAE StandardUS$ 600 - 1,000MOQ: 1 Ton
-
Sand Blasting Steel Grit G18 for Shot Blasting MachineUS$ 600 - 1,000MOQ: 1 Ton
-
Sand Blasting Grit Steel Shot S280US$ 650 - 700MOQ: 1 Ton
Name: Sand Blasting Grit Steel Shot S460/1.4mm/cast Steel Shot
The Major Technological Index:
Products |
Steel Shot |
|
Chemical Composition |
C |
0.70~1.20% |
Mn |
0.35~1.20% |
|
Si |
0.40~1.20% |
|
S |
≤0.05% |
|
P |
≤0.05% |
|
Microhardness |
Normal:40~50HRC (377~509HV) |
|
Hardness Deviation |
Max Deviation ±3.0HRC |
|
Microstructure |
Tempered Martensite or Sorbite |
|
Density |
7.2g/cm3 |
|
Advantge of Metal Abasive
Metallic abrasive are used in many industries, like shot Peening, finishing, blasting, rust removing,surface cleaning etc.No pollution, recycle, durability, As the goods no need acid picking treatment, meet the requirements of environmental protection.
That’s WHY I recommend to you seriously.
Advantage of Steel cut wire shot
Compred with steel grit, you can get 30% reduction on cost. According to our experince, steel cut wire shot will turn into round shot after long-time use. Bright appearance, no dust and long durability is the advantage of our steel cut wire shot . Bosun Abrasive company is the earliest manufacturer of steel cut wire shot.
Specifications
Not made by new steel wire, and cost are lower, surface is polished and clean!
Name |
steel cut wire shot |
|
Chemistry |
(C) |
0.45~0.75% |
(Mn) |
0.4~1.20% |
|
(Si) |
0.10~0.30% |
|
(S) |
≤0.04% |
|
(P) |
≤0.04% |
|
|
Average Hardness
|
41~45HRC (388-436HV)
|
|
Hardness |
±3.0HRC(±40HV) |
|
Tensile Strength |
1660-2200Mpa |
|
|
Density
|
7.8g/cm3 |
|
size |
0.6,0.8, 1.0,1.2,1.4,1.5,1.8,2.0,2.5mm
|
|
SAE |
CW0.6,0.8,1.0,1.4,1.5,1.8,2.0
|
|
We offer a wide range of cut wire shots that are known for their unique abrasive attributes. This abrasive works best for shot blasting where, only steel cut wire shots that does not work during operation and. Our range offers perfect finishing and unsatisfactory results. Our range also prevents denting that is because of the cylindrical shape of steel cut wire shots. Following are the salient features of our range:
- Fluent flow during shot blasting/peening operations
- Solves problem of denting
- Price advantage over steel shots and steel cut Wire shots
- Longer life than steel shots
- Uniform cleaning and comparatively brighter surface
- Solves problem of dust
Blast cleaning of cast steel shot:Used for blast cleaning of casting, die casting,forging,sand removal of casting, steel plate, H type steel, steel structure.
Rust removal of cast steel shot:Rust removal of casting, forging, steel plate, H type steel, steel structure, descaling of forging.
Shot peening of cast steel shot:Shot peening of gear, heat treatment.
Shot blasting of cast steel shot:Shot blasting of profile steel,ship board,steel board,steel material.
Shot blasting of cast steel shot:Shot blasting of steel board, profile steel, steel structure.
Pre treatment of cast steel shot:Pre treatment of surface, steel board, profile steel, steel structure, before painting.
Send Inquiry to This Supplier
You May Also Like
-
Valve BallNegotiableMOQ: 2300 Pieces
-
Good Quality 5mm Stainless Steel BallUS$ 0.0001 - 0.1MOQ: 1000 Pieces
-
316L Stainless Steel BallUS$ 0.01 - 2MOQ: 500 Pieces
-
Forged Steel BallsUS$ 1,000 - 1,200MOQ: 1 Ton
-
Steel Ball for Impact Test of Safety Glass-2260gUS$ 35 - 80MOQ: 1 Piece
-
OEM CastingUS$ 1 - 10,000MOQ: 1 Piece
-
Ball Valve Stainless Steel For Valves PartsUS$ 0.5 - 5MOQ: 1000 Pieces
-
Precision Forging Shot Blast Large Stainless Steel BallsUS$ 1,500 - 6,000MOQ: 1 Metric Ton
-
Y Stainer Ball ValveNegotiableMOQ: 1
-
Propene Polymer Elbow TeeUS$ 2 - 35MOQ: 50 Pieces
