CuSn5-UNS.C51000 Phosphor Bronze / Copper tin alloys

Specifications

CuSn5-UNS.C51000, JIS C5102 Phosphor Bronze bars/ rods/ wires

CuSn5-UNS. C51000 Phosphor Bronze / Copper Tin alloys

 

CuSn5 - UNS.C51000 Phosphor Bronze Alloys, with a nominal composition of 94.80% copper and 5.0% tin, deoxidized with 0.2% phosphorus is the most widely used of the phosphor bronzes, which offering an optimum combinations of such engineering properties as high strength and ductility, superior fatigue and spring characteristics, excellent corrosion resistance, durability for severe service, good bearing qualities with low friction and higher wear resistance, superior forming and spinning, resistance to stress relaxation and good joining properties. In most cases, C51000 alloy has adequate electrical and thermal properties for many current-carrying and heat transfer requirements.

 

Typical Application for CuSn5 Phosphor Bronze / Copper Tin alloys

Architecture: Bridge Bearing Plates

Electrical: Terminals, Contacts, Switch Parts, Electromechanical Spring Components, Resistance Wire, Electrical Flexing Contact Blades, Electrical Connectors, Electronic Connectors, Wire Brushes, Electronic and Precision Instrument Parts, Fuse Clips, Terminal Brackets, Kettles, Pots, Perforated sheets, Textile Machinery parts

Fasteners: Lock Washers, Fasteners, Cotter Pins

Industrial: Bellows, Textile Machinery, Perforated Sheets, Chemical Hardware, Truss Wire, Mechanical Springs, Sleeve Bushings, Diaphragms, Clutch Disks, Bourdon Tubes, Beater Bar, Welding Rods, Pressure Responsive Elements, Sprinkler Parts