High Quality Replacement TAISEIKOGYO Filter Element

TAISEIKOGYO  filter element

TAISEIKOGYO  filter element will help you keep dust from coming out of the top of a hopper. The mesh filter might get clogged up over time and the dust vibrated or shaken free.

Overcome the temperature and compatibility limitations of fabric or synthetic fiber cartridges by replacing them with these  TAISEIKOGYO  filter element. They're good up to 500 °F instead of the usual 250 °F, and they are unaffected by most caustic fluids. Made entirely of 304 or 316 stainless steel, they are cleanable and reusable, and can withstand differential pressures up to 60 psi. (500 psid units are also available.) You can choose particle retention ratings as fine as 5 microns.  TAISEIKOGYO filter element Element surfaces can be plain cylindrical, or pleated to increase surface area. Pleated units rated 100 microns or finer have an underlying support layer of coarser mesh to prevent pleat collapse. Fabrication is by welding and crimping; no silver brazing or epoxy bonding is used. Normally all  TAISEIKOGYO  filter element are supported with coarser filter media to ensure any direct damages to main filtering media under process upsets. A bubble point tests can be done to certify that no opening larger than the specified pore size exist in product joints or seams. TAISEIKOGYO filter element can be back washed & reused.