Contact Platform Support
Help CenterImpact Resistance UHMW-PE Products Blow Plastic Sheet
Related Products
-
Impact Resistance UHMW-PE Products 2mm Plastic SheetUS$ 1 - 5MOQ: 10 Pieces -
pe 500 Million Molecular Uhmwpe SheetUS$ 3 - 5MOQ: 100 Kilograms
-
UHMW-PE Products Lightweight Plastic Sheet of 3 mmUS$ 1 - 5MOQ: 10 Pieces
-
Impact Resistance UHMW-PE Products 30mm Thick Sheet PlasticUS$ 1 - 5MOQ: 10 Pieces
-
Plastic Colored Wear Resistant Yellow Uhmw pe PanelsUS$ 1 - 3MOQ: 100 Kilograms
Specifications
UHMWPE plastic sheet1.no water absorption
2.super wear resistant
3.self-lubricating
4.ISO9001
Impact Resistance UHMW-PE products blow plastic sheet
1. Advantage
1.Abrasive resistance which always have in thermoelectricity polymer.
2.Best shock resistance even in low temperature.
3.Low frictional factor, and well sliding bearing material.
4.Lubricity( no caking, in adhesion) .
5.Best chemical corrosion resistance and stress craze resistance.
6.Excellent machinery process ability .
7.Lowest water absorption(<0.01%) .
8.Paragon electric insulativity and antistatic behavior .
9. Nice high energy radioactive resistance.
10.Density is lower than other thermoplastics (< 1g/m3).
11.Long using temperature range: -269°C--90°C.
2.Main characteristics:
The main performance comparison
High abrasion resistance
Materials |
UHMWPE |
PTFE |
Nylon 6 |
Steel A |
Polyvinyl fluoride |
Purple steel |
Wear Rate |
0.32 |
1.72 |
3.30 |
7.36 |
9.63 |
13.12 |
Good self-lubricating properties,low friction
Materials |
UHMWPE -coal |
Cast stone-coal |
Embroidered plate-coal |
Not embroidered plate-coal |
Concrete coal |
Wear Rate |
0.15-0.25 |
0.30-0.45 |
0.45-0.58 |
0.30-0.40 |
0.60-0.70 |
High impact strength, good toughness
Materials |
UHMWPE |
Cast stone |
PAE6 |
POM |
F4 |
A3 |
45# |
|
Impact strength |
100-160 |
1.6-15 |
6-11 |
8.13 |
16 |
300-400 |
700 |
3.Sheet Size Available:
Dimensions: |
Typical Thickness: |
3000mm*1000mm |
5mm-250mm |
3000mm*1500mm |
|
2000mm*4000mm |
|
4000mm*1200mm |
|
1200mm*3000mm |
*If required,also available in thickness from 1mm-250mm.
4.Technical parameter
Subject |
Unit |
Paraters |
Tensile strength |
Mpa |
>30 |
Compression strength |
Mpa |
≥41.8 |
Bending strength |
Mpa |
≥32 |
Impact strength |
KJ/m² |
≥140 |
Ball identation strength |
N/mm² |
≥40.8 |
Surface resistivity |
Ω |
4.9×10¹³ |
Water absorption |
% |
0.0001 |
Relative waer rate |
G/cm² |
≤0.09 |
Frication coefficent |
% |
<0.09 |
5.Main Products show
Send Inquiry to This Supplier
You May Also Like
-
PVC UV Panel With Marble, Stone, Granite Etc. Pattern Glossy Surface Perfect Wall Panels for Home and OfficeNegotiableMOQ: 100 Pieces
-
Cold Insulation Rubber Plastic Board for HVAC and Industrial Pipeline ApplicationsNegotiableMOQ: 500 Square Meters
-
Plastic Tube Steel Security Half Round Fence Post CapsUS$ 0.09 - 0.31MOQ: 1 Piece
-
4mm PP Corrugated Plastic Sign Panels – Customizable Outdoor DisplayNegotiableMOQ: 3000 Pieces
-
10mm Thich Hdpe Pe300 Extruding Plastic SheetUS$ 2 - 5MOQ: 1 Blade
-
Factory Wholesale Supply Rain Water Drainage Plastic Pvc Rain Gutter Cover Roof Anti Leaf Rain Gutter GuardUS$ 1.53 - 1.74MOQ: 3000 Pieces
-
Retort Separator PP Sheets With Factory PriceNegotiableMOQ: 1
-
Super Clear Transparent Door Colourful PVC Strip Curtain Rolls PVC Door CurtainNegotiableMOQ: 1
-
SANHONG OEM WHOLE SALE Closed Cell pe FoamUS$ 130 - 142MOQ: 28 Cubic Meters
-
20s/6 100% Polyester Silicone Treated Bag Closing Thread 200gNegotiableMOQ: 100 Cartons
