Contact Platform Support
Help CenterTSE/LF Long Life EP Turbine Oil
Related Products
Specifications
TSE/LF long life EP Turbine Oil1. EP performance
2. oxidation stability
3. oil/water separation
4. anti-rusting
TSE/LF long life EP Turbine Oil
Our company is one of the leading dealer of Sinopec lubricants, and we can do lubrucants charging for your vessels when your vessels are berthing at any seaport in China Mainland, Hongkong and Singapore, etc
Marine lubricant --- TSE/LF long life EP Turbine Oil
SINOPEC TSE/LF long life EP Turbine Oil is prepared from hydrogenation base stock by blending with multiple-purpose additives, showing outstanding EP wear resistance and best oxidation stability. The oil is suitbale to be used in lubrication of turbines, industrial drivers and control systems attached with gear reducers.
Advantages:
* Outstanding EP performance and wearing resistance to provide effective protection for gears and bearings and reduce the cost for maintainence and replacement
* Excellent oxidation stability to ensure the prolong oil life and reduce the down-time for oil change.
* Excellent oil/water separation to ensure the rapid removal of moisture entering system through different passages.
* Excellent anti-rusting and corrosion-proof performance to prevent rust/corrosion of equipment.
Certification and approval
* Siemens TLV 901304 (EP) * Alstom Power HTGD 90117 (EP)
Applications
* Long life EP turbine oil is suitable for lubrication and sealing of power generators, industrial drivers, marine turbine with reduction gear box and attached control systems where imporvement of gears' bearing capacity is required.
Typical Properties:
Items |
TSE/LF long life EP turbine oil |
|
ISO viscosity Grade |
32 |
46 |
Viscosity@ 40ºC, mm2/s |
32.2 |
46.27 |
Viscosity Index |
131 |
120 |
Flash Point C.O.C, ºC |
228 |
252 |
Pour Point, ºC |
-10 |
-15 |
TOST (ASTM D943), hrs |
5000 |
5000 |
FZG failure load stage |
10 |
10 |
Special attentions
* oil containers, transportation pipes and extraction tools for turbine oil storage and transportation must be kept clean and dry.
* Residual water and impurities at the bottom of fuel tank should periodically be let out, which is required at least once a week.
* after overhaul work, oil in fuel tank should be filtered until mechanical impurities meet the requirements, then the oil is allowed for application.
Health & Safety
• Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your sales contract office.
• This product should not be used for purposes other than its intended use.
• If disposing of used product, take care to protect the environment.
Certificate
If you need the following lubricants:
Send Inquiry to This Supplier
You May Also Like
-
Lubricating OilNegotiableMOQ: 2000 Barrels
-
AEROPAK Chain Lube OilUS$ 0.55 - 0.55MOQ: 500 Cartons
-
LubricatorsUS$ 100 - 999,999MOQ: 1 Set
-
2015 Popular Grease Prices for Grease PumpUS$ 1 - 100MOQ: 1 Piece
-
300ML Oil CanUS$ 0.8 - 0.9MOQ: 1000 Pieces
-
Fire-resistant Lubricant Oil Purifier MachineUS$ 3,000 - 50,000MOQ: 1 Set
-
Best Seller PENETRATE LUBRICANT SprayUS$ 1.75 - 4.45MOQ: 680 Pieces
-
HAND PUMP OIL CAN - WESCO TYPEUS$ 0.49 - 2.99MOQ: 100 Sets
-
Multi Purpose Anti-Rust Lubricant SprayUS$ 0.6 - 0.8MOQ: 20 Boxes
-
Lubricant GelUS$ 500 - 6,000MOQ: 100