CKYL1-63 2p IEC61008 IP20 AC400/415 63amp ac 400/415v rccb

APPLICATION                                                                                                                              

   CKYL1-63 RCCB is in conformity with the standard of IEC61008. The RCCB can cut off the

fault circuit immediately on the occasion of shock hazard or earth leakage of trunk, thus, it is

suitable to avoid the shock hazard and fire caused by earth leakage.
    The RCCB is mainly suitable for use in varieties of plants and enterprises, building

construction 1 phase 230V and 3 phase 400V 50/60Hz. RCCB is not suitable for use in DC

pulse system.

SPECIFICATIONS                                                                                                                       

NORMAL OPERATION AND MOUNTING REQUIREMENT                                            

• Circumstance temperature-5°C~+40 ,average temperature not exceeding 35 .
• Altitude above sea level less than 2000m.
• Humidity not exceeding 50% at 40°Cand not exceeding 90% at 25°C.
• Installation class Ⅱ or Ⅲ.
• Pollution class Ⅱ.
• Installation method DIN Rail mounting type.
• The external magnetism shall not be more than 5 times of terrestrial one.
• Product shall be installed vertically at the place where there shall be no severe impact and
  vibration. The product is switched on when the handle is at upper position.  

  OPERATION PRINCIPLE                                                                                                      

OVERALL AND MOUNTING DIMENSIONS(Unit:mm)                                                   

PRODUCT PICTURE

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

FAQ:

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Q 1. what's the payment term?   
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ? 
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?   
A. Normally are cartons, but also we can pack it according to your requirement.

Q4.Could you offer Form A or C/O ?   
A. It's totally not a problem.

We can prepare relative documents to forgin affairs office or other office  to apply for this certificate. 
Q5.Would you accept to use our logo ? 
A.If you have good quantity,it absolute no problem to do OEM.