Erasable Highlighter Item 530

Specifications

This products strictly conform to international standards and raw material required in the production is reusable and environment-friently.Below are some details listed for reference.

Customised logo will be welcome !

Plastic parts All plastic material used in production are subject to En71 standards,to ensure a good stability and flexibility of the product.Parts match perfectly with each other and there will be no leakage under a pressure of 30kpa.Cap pull is about 15-20N.Shelf life is guaranteed as 2 years.

Plastic Coloring Fluorescent colorants used in the production are all subject to EN71 standards and are all imported.With very special coloring process,all the products are non-toxic with bright vivid colors.Also with the fine quality colorants, there will be no fading, no transference and no change in colors under normal temperature.

Tip There are 2 types of nib:Imported porous nib and local fibre nib,both are subject to EN71 standards.Fine nibs help to ensure a nice writing experience with no fork lines,And very important,nibs will neither slip into the barrel under any pressure less than 8N, nor break off under any pressure less than 5N.

Ink Imported ink subject to EN71 standards with bright and vivid colors,very good fluorescent effect,good resistance to high temperature.
The ink is imported form S*LAND,Korea.

EN71 BS7272           CONFORMS TO ASTM D-4236
ISO9001                   ASTM F963-96A
ISO14001