Automatic Bending Compression Testing Machine

LKK419 Automatic Bending Compression Testing Machine Introduction:

Automatic Bending Compression Testing Machine is mainly used for compressive and flexural strength testing of cement materials, but also for other materials compression performance test.

LKK419 Automatic Bending Compression Testing Machine Main Feature:

220V power supply, convenient laboratory power supply layout.
Servo motor drive, and compared to the traditional way of oil, no oil, valve stuck and other ills.
Zero noise.
Load force sensors, high precision measurement range of up to 2% to 100% of full scale.
And compared to conventional hydraulic oil change without mid way, eliminating the cost of an oil change, and no wearing parts, high cost.

LKK419 Automatic Bending Compression Testing Machine Main Specification:

The biggest test of kN: 300kN / 10N
Test force measurement range kN: 2% -100% FS
Test Force showed the relative error: ≤ ± 1% of indicated value
Test Force Resolution: 0.01kN
Loading rate: 0.3KN / S ~ 10KN / S (compression)
                                           : 50N / s (bending)
Loading speed error: ± 5%
Upper and lower bearing plate size: φ155mm (compression)
                                               80X150mm (bending)
The maximum distance between the upper and lower plate: 260mm
Screw stroke: 100mm
Servo motive power: single-phase ~ 200V, 0.75 kW
Host Dimension mm: 600 × 560 × 1500mm
Weight: 400Kg
Packing List
Tester Host: 1 set
Lenovo: a station
Black and white inkjet printer: 1 set
Controller: 1 set
Platen: 1 set
Bending fixtures: 1 set
Instructions: 1
Certificate: 1
Packing List: 1