Contact Platform Support
Help CenterTD2500 Digital Amplifier
Related Products
Specifications
C-MARK TD series adopts PFC switching power and class D digital amplification circuitFEATURES
Indication Of Fault:
To show the amplifier is working normally, in case of over voltage protection, insufficient voltage protection, short circuit protection, overload protection, overheat protection, output DC protection,the yellow "Fault" LED in the front panel of the amplifier will be illuminated.
Short Circuit And Overload Protection:
When short circuit or overload happens, the function of short circuit protection will be activated to protect the amplifier from being damaged.
Output DC Protection:
If there is output DC signal in the output channel, instantaneous protection circuit will cut off power of all channels to ensure the safety of other supported products.
Over Voltage,insuffcient Voltage Protection:
If power supply of amplifier is higher or lower than required range of working voltage of the amplifier, the system will cut off the amplifier automatically to protect it.
Temperature Controlling Fan:
The working state of the fan can be automatically controlled based on internal temperature of the unit, when the internal temperature exceeds 45°C, the fan begins to rotate to lower internal temperature. When the temperature is lower than 30°C, the fan stops rotating to achieve optimal effect of transmitting heat, which will not bring about environmental noise.
Indication Of Temperature Power Limiter:
Indication of temperature power limiter mainly refers to heat protection function. The amplifier can automatically adjust internal temperature when working to keep the temperature among the limited range, so the key components of the system can work under the steady temperature. If surrounding temperature rises, power will be gradually reduced to the sustaining state, the yellow temperature power control LED in the front panel of the amplifier will be illuminated at the same time.
The function of the other kind of heat protection circuit refers to the fact that when power reduces, internal temperature can not be sustained below 75°C, the amplifier will stop working and the fault-indication yellow LED in the front panel will not be illuminated until temperature drops to safe level.
When internal temperature is below 65°C, the system will be recovered automatically.
Input Signal Limiter:
When the input signal exceeds 0dB, limiter circuit automatically starts to prevent clip distortion from occurring in output power so as to maintain full peak power.
Wider Range Of Voltage Of Power Supply:
Range of power supply is AC90-264V 45-65Hz, which is suitable for global power supply.
Send Inquiry to This Supplier
You May Also Like
-
High Accuracy NTC 10K 3950 Underfloor Heating Temperature Sensor TPE Injection Molded ProbeUS$ 0.7 - 1MOQ: 1000 Pieces -
Professional Wireless DJ Audio Mixer - 6-Channel BT Compatible DJ ControlNegotiableMOQ: 1
-
2014 High Quality 1U Wholesale Home Power Amplifier E-200US$ 330 - 630MOQ: 1 Piece
-
New Design Monitor Speaker StandUS$ 7 - 8MOQ: 200 Pieces
-
9V3Ah LiFePO4 Battery for LED LampNegotiableMOQ: 100 Packs
-
Roto Mold Plastic Home LightNegotiableMOQ: 100 Sets
-
Power Amplifier 2.0 Channel Professional Power AmplifierUS$ 20 - 50MOQ: 100 Pieces
-
Multimedia Central SystemUS$ 90 - 150MOQ: 5 Sets
-
Dual 10'' Line Array Neodymium Driver HornUS$ 1 - 5,000MOQ: 1 Set
-
1500w Mini Fog Machine /smoke MachineUS$ 1 - 100MOQ: 1 Piece
