5W LED Downlight 5W Recessed IP44 LED Downlight

The LED Downlight series products is formed by lower power LEDs and Aluminum Alloy,the shell design has combined the LED luminous angle.

To acheive reflection and high heat dissipation transmittance,we quality bonding LED chips and lamp base.

It has the advantages if energy-saving,environment conservative,long serice life,suitable for office,meeting room etc,.

• No flicking
• Down to 5% with standard incandescent or low voltage drivers.
• High efficiency driver with a power factor >.90 with input power of 220V, 60Hz
• Adapted imported quality IC raw material

LED Down Light 6500K 100V-265V:

1. Using SMD5730 or as customer's request.

2. Using Isolated driver - more safe 
3. Using good heat dissipation heat sink, extending life of LEDS.
4. lower light attenuation to 13%-14% in 2 year
5.led source,led downlight save more than 80% compare to incandescent lamp, save more than 60% compared to fluorescent light
nstant current, low power consumption, electro optic power near 100%

More Features:

Green Illumination: No strobing during working, fast response (no delay) , no damage with frequency switching and energy saving 90% than conventional down lights.

Circuit Design: Constant current isolated circuit design with wide voltage range and wide frequency.It is not only safe , but also small measurement with high efficiency and high power factor .

Long lifespan:  introduce the advanced thermal management technology of  LED. The light decay of products is very low and the lifespan is above 50,000 hours.

Why you choose our LED SMD Downlight?

1. Use die-casting aluminum alloy as the material of main-body.
2. Use high transparent PMMA as lens, high pure reflector makes sure more light coming out
3. Fashionable &novel looking design, ultra thin aluminum body for easy operating.
4. Excellent heat dissipation performance.
5. Isolated driver, ensure the long life span.
6. Energy-saving and high efficient LED driver.

Application Case:

 Led downlight Application:

1. Recessed lighting , shelf lighting, ceiling/wall cover
2. Cabinet and under counter lighting, office ect.
3. Back lighting, step lighting, light boxes 
4. Merchandising, exhibition stands, and panels

5.Commercial application

Notices:
1. Open the packaging, check the products carefully, and take them gently.
2. The wire must be passed 3C certification of three core cable, To reduce the risk of fire hazard.
3. Wire copper is not exposed outside of the power terminal holes, To avoid a short circuit or get electrocuted.
4. Installation and removal products, please disconnect the light's power to avoid the risk of electric shock.

Acutions: All of this install instruction is for conference, please install the down light in professional instruction.

 Installation:

1. Turn off the power.

2. Drill a suitable mounting hole on ceiling according to size requirement of different item
3. Open the line pressing cover with cross screwdriver.
4. Connect input cable end of LED fixture to suitable power socket(110V/220V), and make sure connecting way is right. Make sure the two connectors inserted into the terminal at the same time when connecting the wire to the input end of the lamp, then lock the screw.
5. Close the line pressing cover with cross screwdriver; make sure the power line fixed tightly.
6. Pinch both springs, then push light into installation hole, hangers rebound and chuck automatically. Make sure the light fixed well. 
7. Re-check everything is well-connected, and then turn on the power.