Home > Construction & Decoration > Special Building Materials > Polypropylene Fiber > Plastic Fiber for Cemment Curved Macro PP Fibre / PP Concrete Curved Fiber

Plastic Fiber for Cemment Curved Macro PP Fibre / PP Concrete Curved Fiber

Plastic Fiber for Cemment Curved Macro PP Fibre / PP Concrete Curved Fiber photo-1
Plastic Fiber for Cemment Curved Macro PP Fibre / PP Concrete Curved Fiber photo-2
Plastic Fiber for Cemment Curved Macro PP Fibre / PP Concrete Curved Fiber photo-3
Plastic Fiber for Cemment Curved Macro PP Fibre / PP Concrete Curved Fiber photo-4
Plastic Fiber for Cemment Curved Macro PP Fibre / PP Concrete Curved Fiber photo-5
Plastic Fiber for Cemment Curved Macro PP Fibre / PP Concrete Curved Fiber photo-6
US$ 1,900 - 2,500 MOQ: 1 Ton
Key Specifications
Get Latest Price
Use:
Concrete
Density:
0.92-0.95g/cm3
Melting Point:
160-170℃
Payment & Shipping
Payment Methods:
Port of Shipment:
Qingdao port Shanghai port
Delivery Detail:
Delivery time depends on order quantity.
Use Concrete
Density 0.92-0.95g/cm3
Melting Point 160-170℃
Fiber Length 25,36,40mm
Elastic Modulus ≥4000 Mpa
Tensile Strength >350Mpa
Ignition Points 560C
Elongation At Break ≥15%
Place of Origin Shandong, China
Brand Name luke
Model Number LKMP-25

With polypropylene fiber as its raw material, curved PP macro fiber is produced by special molding process and surface modification; it has advantage of acid, alkali resistant, excellent tensile, easy dispersing, convenience for construction and no damage to vehicles and pavement and no need for special conservation. Curved PP macro fiber can be used instead of steel fiber to enhance the crack resistance of cement concrete and significantly improve the toughness and flexural of concrete. Because of special shape, curved PP macro fiver has good combination with concrete and strong bond.

 

plastic fiber for cemment Curved Macro PP Fibre / PP concrete curved fiberplastic fiber for cemment Curved Macro PP Fibre / PP concrete curved fiberplastic fiber for cemment Curved Macro PP Fibre / PP concrete curved fiberplastic fiber for cemment Curved Macro PP Fibre / PP concrete curved fiber

 

Applying Instruction

1,Dosage: more than 3kg/cubic meter of concrete.

2,Length: 36mm for general crack level, no more than 25mm for shotcrete, best use no more than 35mm.

3,Mix design: In general, no need change the ratio parameters of concrete. considering the concrete anti-cracking performance requirements, can add 0.9 kg monofilament fiber per square concrete

4,Mixer: Horizontal Two-shaft forced Mixer

5,trring requirement: crushed stones, fibers and sands are put into the mixer in succession. After strring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials can be put into as usual, but the stirring time should be properly prolonged to more than 4 minutes to make fiber completely mixed.

6 ,Forming conservation: Conservation can be based upon the requirement of ordinary concrete. No special requirement, tape time can be extended for 30 seconds according to actual situation. In order not to bring out fiber, plastering should be carried out after the concrete surface passivation slightly.

7,package: 1kg per bag may packed according to requirement.

 

Functions:

1,Can reduce damage when happened earthquakes and other natural disasters.

2,To reduce fatal flaws in concrete

3,To reduce the leakage of concrete

4,To protect steel from corrosion

5,To improve the durability of concrete structures

6,Increase the wear resistance of concrete

7,Increasing the concrete crack resistance, flexural strength, increased toughness of concrete, to extend the life of concrete binder

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Trading Company
Year Established
2013
Factory Size
Below 1,000 square meters
Total Employees
11 - 50 People

Recommended Categories

Explore top categories and find suppliers for your specific needs