Contact Platform Support
Help CenterTongue & Groove External Structural Sheet Flooring Substrate for Tile Finishes Over Timber or Lightweight Steel Floor Joists
Related Products
-
Australian Standard Fiber Cement Interior Flooring/Cement Sheet Flooring/internal Residential Wet AreasNegotiableMOQ: 1 Square Meter -
Advanced Lightweight Fiber Cement Composite Flooring/ Heavy-duty Performance/ Replace Compressed Fibre CementNegotiableMOQ: 1 Square Meter
-
Exterior Flooring /Lightweight Fibre Cement Flooring Sheet Against Moisture Damage to Balcony and Decks.NegotiableMOQ: 1 Square Meter
-
6mm Thick Autoclaved Cellulose Fibre Reinforced Cement Sheet Use Under Ceramic Tile or Slate Underlay SubstrateUS$ 4 - 35MOQ: 500 Pieces
-
4.5mm Thick Fiber Cement Eaves Lining Sheet for for External Eaves LiningsUS$ 4 - 35MOQ: 500 Pieces
FC Tongue & Grooved Lightweight Fiber Cement Flooring sheet
FC Exterior and Interior Flooring sheet is an advanced lightweight fibre cement flooring sheet , an external structural sheet flooring substrate for tile finishes over timber or lightweight steel floor joists, that offers speed of installation and the protection you need against moisture damage to balconies , verandas and decks.
Interior Flooring Sheet
Exterior Flooring Sheet
FC Exterior and Interior Flooring has a flat surface with a tongue and grooved joint to the two long edges of the sheet. These edges are coloured Red ,Blue or Black for easy identification.
FC Exterior and Interior flooring is sealed on all sides with an advanced polymer coating that helps protect the board from moisture-related problems. A topcoat on the surface of the board provides good adhesion. The continuous mesh reinforcement on the underside of FC Exterior Flooring enhances the heavy-duty performance of Fiber Cement flooring, adding extra strength and impact resistance to deliver a durable and suitable external residential flooring substrate.
FC Exterior flooring can be up to 40% faster to install than conventional compressed fibre cement sheet. This is because is about 24% lower in density than compressed fibre cemen，making it lighter, and easier to handle and install, without compromising heavy-duty performance.
It’s tongue and grooved, which delivers engineered joints and eliminates the need for timber trimmers under these joints.
FC Exterior Flooring sheet can be installed with power driven nails for ease of installation.
FC Exterior Flooring conforms to the requirements of AS2908.2: Cellulose-cement products, Part 2: Flat sheets for Type A Category 3.
FC Interior and Exterior Flooring Sheet Standard Size
ADVANTAGES
Lightweight, heavy-duty, Durable
• Easy to install using screw or gun-nail fixings
• Tough durable substrate for external areas
• Immune to permanent water damage
• Will not rot, warp or burn
• Immune to termite attack
• A suitable substrate for many forms of finishing
Internal and external structural flooring substrate for Wet area, Balconies,decks, Verandas
FC Exterior Flooring provides a light weight but solid substrate for self contained dwellings, is suitable for internal and external residential flooring applications. When combined with a suitable waterproofing system it can then be covered with your selection of tiles, decorative finishes, synthetic turf, outdoor carpets or suitable paint finishes. It is suited for a range of external decking applications, including:
• Upper and lower storey decks and balconies
• Tiled verandahs
• Trafficable roofs
• Swimming pool surrounds (non-saltwater)
For balconies that aren’t over habitable rooms – verandas for example – no additional waterproofing membrane is needed once FC Exterior flooring is installed. For balconies over habitable rooms, a waterproofing system needs to be applied.
FC Exterior Flooring may be installed to timber or steel floor joists at 450mm maximum spacings in accordance with the relevant Australian Standards. As an external substrate for tiled residential balconies and verandahs. It’s an alternative to particle board, plywood or compressed fibre cement.
FIRE RESISTANCE
FC Exterior & Interior Floor sheet can be used wherever non- combustible material is required by the code..
LOADS
FC Exterior and Interior Flooring has been designed to resist a live load of 2.0kPa and a 1.8kN point load .
Send Inquiry to This Supplier
You May Also Like
-
1220*2440mm Cement Board 4x8 60mm Fibre Cement Board China SuppliersUS$ 3.5 - 4.8MOQ: 900 Pieces
-
Cement BoardNegotiableMOQ: 1
-
Soundproof Decorative 25mm Fiber Cement BoardUS$ 8 - 30MOQ: 300 Square Meters
-
External Wall Thernal Insulation BoardsUS$ 18 - 28MOQ: 1000 Square Meters
-
AS Certificate no Asbestos Wood Grain Fiber Cement SidingUS$ 5MOQ: 100 Pieces
-
Multilayer Solid Wood Sound-absorbing BoardUS$ 18 - 20MOQ: 1000 Square Meters
-
MGO Board for Prefab HousesNegotiableMOQ: 100 Pieces
-
Colored Calcium Silicate Panel Wall Sheet Fire Resistant and Waterproof 5-30mm ThicknessUS$ 1 - 10MOQ: 1000 Pieces
-
Good Heat Insulation & Heat Preservation Performance,Standard Size Thickness 5-30mm Fiber Cement BoardUS$ 5.6 - 42MOQ: 6400 Sheets
-
AS Certificate Colored Cement Wood BoardUS$ 3 - 15MOQ: 100 Square Meters
