Contact Platform Support
Help CenterCast Steel Cut Wire Shot 0.4mm for Shot Blasting Machine
Related Products
-
Cast Steel Cut Wire Shot 1.0mm for Shot Blasting MachineUS$ 3,000 - 5,000MOQ: 500 Kilograms -
Steel Cut Wire Shot Blast Steel Shot Ball PriceUS$ 3,000 - 5,000MOQ: 500 Tons
-
Conditioned SUS304 SUS430 Material Stainless Steel Cut Wire Shot for Shot Blasting Machine PriceUS$ 3,000 - 5,000MOQ: 500 Tons
-
Abrasive Grain Stainless Steel Cut Wire Shot PriceUS$ 3,000 - 5,000MOQ: 500 Tons
-
Stainless Steel Cut Wire Shot PriceUS$ 3,000 - 5,000MOQ: 500 Tons
1)Bonzer Steel cut wire shot is made by cutting the cold drawn steel wire into lengths equal to the wire diameter, and then making it round if necessary through the rounding (conditioning) process.
2)Size: 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm
3)Appearance:
As-Cut: Due to its sharp edge, it works good for cleaning where speed of cleaning is critical and somewhat rough finish is acceptable. But as-cut shot is not advisable to use for peening operation.
Conditioned: Cut shots which are rounded off are used more in the shot peening process, also in different industries such as automotive industry, aerospace industry, shipping industry.
4)Product Photos
5)Technical Parameter
| Product | Steel Cut Wire Shot | |
|
Chemical Composition |
C | 0.45~0.85% |
| Mn | 0.3~1.3% | |
| Si | 0.15~0.35% | |
| S | ≤0.04% |
|
| P | ≤0.04% |
|
Hardness |
HRC 45-52/HRC55-65 |
|
| Unit Weight | 4.4kg/L | |
| Grain Size | 0.3mm-2.0mm | |
| Cycling Usage Counter | 5000-8000times | |
| Microstructure | Even Tempered Martensite or Sorbite | |
| Density | ≥ 7.6g/cm3 | |
| External Form |
a)Non-passivated steel cut wire shot b)Passivated steel cut wire shot c)Rounded steel cut wire shot |
|
1) High strength, high ductility, long service life;
2) Low breakage, low wear, little dust;
3) Low wear of the equipment, long life of accessory;
4) Reduce dedusting system load, lengthen usage time of dedusting equipments.
Widely used in shipping,casting,automobile,avuation,mechanical spring,wheel gear etc becuase of good comprehensive mechanical performances.
G1 Conditioned ---- Remove sand and rust on iron casts,steel casts,forgings,heat treatment pieces,metal panel etc.
G2 Double Conditioned ---- used in all kinds of steel plate pretreatment,castings,standard components,stamped parts,stainless steel parts and other work pieces, which can get the good shot basting results of removing sand and rust,surface descaling,smooth and tidiness.
G3 Spherical Conditioned---- used in many feild of blastig cleaning and shot peening and perform the tasks of surface cleaning,removing coating and corrosion,olidifying the surface of work pieces.
1.Payment Term
1.T/T,30% deposit, 70% before shipment
2.L/C irrevocable LC at sight
2.MOQ
500KGS
3.Delivery Time
15 days after received your deposit
4.Free Sample
200g
5.Relative Standards
SAE,ISO9001 and ISO1004
Send Inquiry to This Supplier
You May Also Like
-
Finishing Media Brown CorundumNegotiableMOQ: 1 Ton
-
Good Performance CBN Abrasive Sanding Belts for Steel ,alloyNegotiableMOQ: 50 Pieces
-
Milling and Polishing Material Brown Fused Alumina / Low Price Fused AluminaUS$ 200 - 680MOQ: 1 Ton
-
Floor Sanding Screen MeshUS$ 0.01 - 0.3MOQ: 1000 Square Miles
-
YDF-SS-330 Low Price Cast Steel Shot Price for Polish and GrindingUS$ 1 - 1,000MOQ: 1 Ton
-
Artificial DiamondNegotiableMOQ: 1
-
2016 Products Foshan Abrasive Manufacturer For Glazed Polishing Vitrified TileUS$ 3 - 4.5MOQ: 24 Pieces
-
Flap Wheel Small Sanding DiscsUS$ 0.12 - 0.48MOQ: 5000 Pieces
-
3mm Shank Pink Mounted StonesNegotiableMOQ: 1
-
Carbon Steel Cut Wire ShotUS$ 450 - 550MOQ: 10 Metric Tons
