standard guide rails

Specifications

standard guide rails 

 standard guide rails  :A  standard guide rails is a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside equipment racks. These products are typically made from cold rolled carbon steel sheet with a zinc-plated and chromated bright surface finish. The term derives from the original specifications published by Deutsches Institut für Normung (DIN) in Germany

1.Specification

Brand: T&G

Item: standard guide rails

Model No.: T&G D3215K15+

DIN Type: 35 mm standard din rail

Cross Section Dimension: 35mm x 15mm x 1.5mm (Width x Height x Thickness)

Slot Dimension: 6.2mm x 15mm on 25mm center (other slot dimension available upon request)

Weight: 0.68 kg per meter

Material: Hot dip galvanized steel

RoHS Compliance:yes

Standards: EN50022, EN50035, EN60715, IEC715, IEC715, JISC2812, JB6525

2.

Detailed information of standard guide rails

3.Data Sheet of standard guide rails

T&G D3215K15+  standard guide rails
Width	32mm
Height	15mm
Thickness	1.5mm
Hole Dimension	6.2mmx15mm on 25mm center(hole can be customized)
Drawing:

4.Raw Material quality certificate 

5.RoHS Certificate

6.Main Market

Cooperative Partner

7.Package of the standard guide rails  

8.Loading the Container 

9. Application

FAQ

T&G standard guide rails is easily fit the DIN Rail cutter manufactured by normal manufacturers.

T&G standard guide rails use steel products produced by domestic ultra-large steel works.

All  standard guide rails are gone through strict inspection before shipment.