2016 New Product 15W NFC Bluetooth Vibration Speaker Bluetooth Resonance Speaker

2016 New Product 15w NFC Bluetooth Vibration speaker 

1. ABS material;
2. Bluetooth, Airoha 4.1; bluetooth resonance speaker
3. NFC, easier Bluetooth connection;

4. Built-in microphone, for hands-free phone call;
5. RMS 15W, Two speaker drivers inside (one membranes for high frequency + one vibration for bass sound  ) 
6. Input Voltage: DC5V, 1100mA
7. Charging time: 2-3 hours
8. Power supply: rechargable built-in Lithium battery, 3.7V, 1100mAh; 
9.battery lead time: Around 3H when the volumn is at 70% in the state of full charge 
10. Bluetooth working distance: over 10m

Operation (Please refer to the Operating illustration)

As sound travels in waves placing it in the centre of the surface will ensure the clearest sound.

It is strongly recommended that you try various surfaces and positioning of the speaker to ensure maximum output. Any surface that allows for vibration will produce a good sound.

Glass is the clearest sound and most suitable for high frequency music. To enjoy rich bass try placing the speaker on wooden surface, such as a table or desk. Experiment with your speaker-it’s part of fun-try it on a door, or fix it to be a plasterboard wall(receive permission if you don’t own the wall).

15W NFC Bluetooth Vibration Speaker Packing details:

Product weight: 0.3KG

Product size: 63*60.5*81mm

Pack means: 20pcs/ctn

N.G/G.W: 6/9kg

Carton size:57.5*32.5*22.5cm

For our Latest 36W NFC Bluetooth Vibration Speaker please Click below picture:

Our Manufacturing Facility:

Our Customers choose Starnec because of our:

Industry Knowledge

Technical Expertise

In-House Design/Engineering

Total Quality Control

Reliable products

Responsive Service

Our Standard QC Process

At Starnec Technologies, quality is not only a mindset, but also a formalized system. We continually improve our products, service and processes using our company-wide quality management system to maintain control of quality throughout every step of production.

Our division of the quality control process into three separate processes to ensure the quality of our products.

 

 

Incoming Quality Control

It is the job of the IQC process to conduct inspections and handle quality problem before the assembly process starts. We inspect incoming raw materials to make sure it pass our quality standard.

 

 

Tasks of IQC Department include:

· Perform sampling and monitor all incoming shipment

· Survey certified vender constantly

· Evaluate supplier quality record

 

In-Process Quality Control

Our IPQC Department supervises the quality system during assembly process to detect and handle problems during assembly process

 

 

Tasks of IPQC Department include:

· Inspect assembly process to meet SOP and Schematics.

· Perform inspections on assembled and in-process materials

· Electronic conductivity and functionality test with testing equipment

 

Final Quality Control

FQC is the final quality control process before shipment. Therefore, it is important for us to ensure our shipment is defect-free.

 

 

Tasks of FQC Department include:

· Perform visual and functional inspection

· Apply sampling based on the MIL-STD-105E standard.

· Submit failure analysis reports and alert engineering staff.

 

Starnec is committed to deliver quality products and excellent service to put a smile on every customer’s face. It is our job to make sure all products are in excellent condition before they are in the hands of our customer.

No need to worry about your vender sending you junk anymore!!

We provide QC Report to our customer before all shipment!!

SAMPLE QC REPORT