Plywood Form Snap Tie Wedge a Bracket
snap tie and snap tie wedge used together in plywood form system.We could supply snap tie and wedges with competitive price
Snap Ties Features:
1) Wire diameter: 5.70mm
2) Materials: 45# steel
3) Tensile strength: 4,500lbs
Concrete snap Ties are manufactured with either hot or cold forged integral heads.Each snap tie is fabricated with flats or crimps to prevent the snap tie from turning in the concrete during breakback operation.Available with fixed metal spreader washers or plastic cones.
1) Wire diameter: 5.70mm
2) Materials: 45# steel
3) Tensile strength: 4,500lbs
4) Used with forms for poured wall construction
5) packing:100pcs/box
Style:
4 3/4" x 6" /8" / 10" /12"........24"
8 1/4" x 6" /8" /10" /12"..........24"
Send Inquiry to This Supplier
You May Also Like
-
Rebar Springs Clamp Scaffold Beam ClampsUS$ 0.7 - 0.7MOQ: 30000 Pieces
-
China Manufacture Building Steel FrameworkUS$ 1,300 - 1,400MOQ: 22 Tons
-
Anchor Plate With Wing Nut for Tie Rod of BuildingUS$ 1 - 100MOQ: 100 Sets
-
Construction Steel Rapid ClampUS$ 1 - 3MOQ: 100 Pieces
-
Plastic Tie Rod ConeUS$ 3.82 - 52.3MOQ: 1 Ton
-
2014 New Design Plastic Mould Interlocking Molds Concrete Hollow Blocks Bricks MakingUS$ 5 - 10MOQ: 500 Pieces
-
Film Faced Plywood Use as Construction PlywoodUS$ 100 - 300MOQ: 50 Cubic Meters
-
China Manufacture Best Quality Poplar Eucalyptus Film Faced PlywoodUS$ 330 - 430MOQ: 10 Pieces
-
16" TJI Floor Wooden Joist for USA Market 90x45mm Flange I JoistNegotiableMOQ: 5000 Sheets
-
H20 Timber Beam H20 Timber Beam Formwork for Column and WallUS$ 6.50 - 6.60MOQ: 40





