Contact Platform Support
Help CenterCE FCC ROHS Approved Wireless Alarm Magnet/Magnetic Door Alarm Sensor For Remote Control
Related Products
-
2016 The Newest Wireless Magnetic Door SensorUS$ 1.5 - 2MOQ: 100 Pieces -
New Independent Wireless Magnetic Door Contact Sensor WholesaleUS$ 1.5 - 2MOQ: 100 Pieces
-
High Security Wireless 12v Magnetic Switch/door Alarm Sensor YA-MC05US$ 1.5 - 2MOQ: 100 Pieces
-
High Security Wireless 12v Magnetic Switch/door Alarm SensorUS$ 1.5 - 2MOQ: 100 Pieces
-
Wireless Alarm System Magnetic Door Contact SensorUS$ 1.5 - 2MOQ: 100 Pieces
Door /window sensor for GSM alarm system. You can choose fixing code, or learning code. And also choose 315MHZ or 433MHZ.
1.easy to install
2 .Can work individually
3.can work with other alarm system
4.This is separated wireless door sensors, magnetic control and
5.wireless transmit are separatad .
6.It can be installated in doors ,windows and other special places.
Operating voltage |
DC12V |
Standby current |
≤5uA |
Transmitting current |
≤15mA |
Battery life |
1 to 2 years |
Transmitting Freq. |
315MHz,433MHz or 868MHz |
Sending distance |
>100m (in the open area) |
Code mode |
fixed code, roll code |
1x wireless door/window sensor
1x sticker
1x 12V battery
Load batteries in part A of the wireless door/window magnets and fix the same on doors/window frames to be monitored, and part B on the doors/windows, as close to each other as possible, as shown in Figure. (We recommend fix parts A and B with screws. The screw holes of part A are located in the mounting board, which should be punched using hard objects).
Door detector (Magnetic) installed on the active door, clean the door’s corresponding position firstly,
remove the wireless door detector, stick the double-sided adhesive paste at the bottom of door detector, door detector’s installation should note the following:
1.Door detector A (transmitter) and door detector B (magnet) should be installed separately,
that the transmitter is mounted on a fixed frame, and the magnet should be mounted on the door
activities (transmitter side position lights should correspond with magnet )
2.magnet and transmitter should be aligned up and down well ,the distance between both should not exceed
10mm.
3.In the time of opening door after installation,door detector’s indicator will flash 1time/s, it expresses the
installation is right.
4.Door detector No 1. indicator flashes one time each second represents alarm prompt, No 2. indicator light
on all the time express battery not enough power.
5 Door detector’s A, B can also be reinforced with screws.
Send Inquiry to This Supplier
You May Also Like
-
Fragile StickerUS$ 10 - 100MOQ: 2000 Sheets
-
Security AlarmNegotiableMOQ: 2500 Combos
-
Electronic Horn/buzzing Sound（Wechat:13510231336）NegotiableMOQ: 500 Cartons
-
Safety With AlarmUS$ 0.65 - 4.5MOQ: 1000 Pieces
-
Anti-theft Alarm Device for Mobile Phone/computer/laptop Display Supplier's ChoiceUS$ 0.1 - 2MOQ: 5 Pieces
-
Wireless Magnetic Door Sensor Contact SDM-100 Wireless Mental Rolling Door Magnetic Contact Wireless Rolling Door SensorUS$ 2 - 3MOQ: 1 Piece
-
Gsm Gprs Rtu 4~20 mA / 0~5 V Gsm Sms Temperature Control AlarmUS$ 60 - 90MOQ: 5 Pieces
-
Metal Type Magnetic Proximity Switch SensorUS$ 4 - 8.1MOQ: 20 Sets
-
Hand Emergency Signalling Apparatus,power Tools,handware Tools,ISO9001,UKASUS$ 239.5 - 254.6MOQ: 1 Piece
-
H0292 LED Key Finder Wireless Key RF Item Locator Remote Control Pet CellUS$ 0.28 - 0.42MOQ: 10000 Pieces
