Contact Platform Support
Help CenterHammer PH65 Shank 35mm Flat Chisel
Related Products
-
Professional Supplier Good Performance 14*250mm Plus Shank Sds Chisel,masonry Sds Chisel,40CR Steel ChiselUS$ 0.5 - 6MOQ: 100 Pieces -
SDS MAX Point Flat Wide Chisel for Concrete and Stone,sds Max ChiselUS$ 0.5 - 6MOQ: 100 Pieces
-
SDS PLUS Point Flat Groove Chisel for Concrete and Stone,sds Groove ChiselUS$ 0.5 - 6MOQ: 100 Pieces
-
SDS PLUS Point and Flat Chisel for Concrete and Stone,sds Point ChiselUS$ 0.5 - 6MOQ: 100 Pieces
-
SDS PLUS Point and Flat Chisel for Concrete and Stone,sds Plus ChiselUS$ 0.5 - 6MOQ: 100 Pieces
1. Hitachi / Makita Standard 30mm Hexagonal Tool
2. Shank: PH65
3. Material: 40Cr
4. Extra Long Chisel Head for a Life Time
PH65 Shank Flat Chisel
Power tools accessories, suitable for used with electric hammer in chiseling hole, cutting, chiseling groove for concrete and brick wall.
Material: 40cr round steel
Packing: white plastic tube or plastic pouch
HRC: 48-52 degree
Surface Finish: sandblast
Point chisel, Flat chisel (35mm/40mm/50mm/75mm/100mm), spade chisel,
Length available:410mm/450mm/500mm/600mm/800mm/1000mm
- Existing samples: free of charge. Sampling time: 3-5 days.
- Customized samples: charging according to the cost; returing after placing orders. Sampling time: 2 weeks.
Our Advantages
- Low MOQ: It can meet your promotional business very well.
- OEM Accepted : We can produce any your design.
- Good Service : We treat clients as friends.
- Good Quality : We have strict quality control system and good reputation in global market.
- Fast & Cheap Delivery: We have big discount from forwarder (Long Contract).
Check below for more information on placing an order
1. Inquiry - Professional quotation. |
2. Confirm the price, lead time, payment term etc. |
3. POWERSKY Tools sales send the Proforma Invoice with POWERSKY Tools seal. |
4. Client makes the payment for deposit and send us Bank receipt. |
|
5. Initial Production Stage - Inform the clients that we have got the payment, and will make the samples according to your request, send you photos or samples to get your approval. After approval, we inform that we will arrange the production & inform the estimated time. |
|
6. Middle Production - send photos to show the production line which you can see your products in. Confirm the estimated delivery time again. |
|
7. End Production - Mass production products photos and samples will send to you for approval. You can also arrange the third party inspection. |
|
8. Clients make payment for balance and POWERSKY Tools ship the goods. Also can accept payment term - Balance against B/L copy or L/C payment term. Inform the tracking number and check the status for clients. |
9. Order can be say “finish” when you receive the goods and satisfy with them. |
Send Inquiry to This Supplier
You May Also Like
-
Bushing 3904369 for Cummins Engine PartsUS$ 12.12 - 12.75MOQ: 10 Units
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Excavator Rock Sieve Bucket 1350mm 1500mm for CAT330 CAT336 Excavators Heavy Reinforced Skeleton Bucket With TeethUS$ 1500 - 3500MOQ: 1 Piece
-
Filter Element 4110016259009 for SDLG Wheel Loader Genuine OEMNegotiableMOQ: 1 Piece
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
High-Performance GT2263KLNV Turbo Charger for Hino Engineering/commercial VehiclesUS$ 540 - 560MOQ: 1 Unit
-
48-17 Excavator Spare Part for Pump Drive System YNF18405NegotiableMOQ: 1 Piece
-
Original MTU Engine Spare Parts 5530900261 FLAPNegotiableMOQ: 1 Bag
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
