High Brightness Road Warning Construction Flashing Light
Product description:
1.Highlight LED, good warning effect, save electricity and energy ,long life span.
2. Light-operated Function: close the MainSwitches, light is out; open the MainSwitches, close the photoswitches, light is on all the time; open both the MainSwitches and the photoswitches, if the light is strong, light isn’t bright, on the contrary, light is bright, and it can be controlled automatically.
3. The shell of the construction flashing light is made of aluminum alloy, and the surface is plastic spray paint, beautiful and not easy to be corroded, and can be without rust after long time use.
4. The elements of the construction flashing light adopt sealing treatment, high protectiveness, Waterproof, dustproof effectively.
5. Every lamp is consist of 20 highlight LEDs, and vacuum coating reflector; Bright transparent, high shock-resistant, aging resistant PC lampshade,which can make our warning distance be more than 2000m at night.
6. With a piece of 6W solar panel and 2 pieces of 7AH storage battery, it can work continuously for 150 hours in rainy days. Besides, it can discharge after full charged.
Specifications:
Voltage |
DC12V |
Solar panel Power |
7.5W x 2 |
Module |
Xenon lights |
Useful life |
more than 10 million times |
Current draw |
2.5A |
Light Color Available |
Red,Blue,Amber,Clear |
Dome Color Available |
Clear |
Operating Temperature |
-40 to 55(centigrade) |
Product Dimension |
98L× 72W× 91H mm (single light) |
Net Weight(kg) |
0.95 (including SPS2 flashers) |
Gross Weight(kg) |
1.15 (including SPS2 flashers) |
Technique Data:
Shell: 520*165*135mm
Solar panel: 290*230mm
Base: height 105mm dia 70mm
Base install pipe: inner dia 60mm
Color: blue red yellow white(the color can be customized)
Working voltage:12V
Battery power: 14Ah
Solar panel: 6w
Warning distance: >2000m (at night)
Working time: 150 hours in rainy days
Function:
1.Be placed in the front of pavement maintenance to warn the drivers of careful driving.
2.Be installed in the danger area to warn the drivers and passengers in order to avoid the happening of traffic accidents. Such as railroad intersections, curves, bridges, the entrance of schools, residence communities,the factory gates.
Installation instruction:
1. The light is equipped with footstock and baseboard, the drum on the switch side with 3 screws is baseboard, while the other side is footstock.
2. The footstock is used to fix solar panel. First of all, take down the screw cap, put the solar panel on the screw, then screw on the screw cap.
3. The baseboard is used to fix the lamp body, insert the support bar into the base, to tighten the screw.
4. Adjust the direction of the lamp body and solar panels,ensure that the solar panel can receive light as much as possible.
Send Inquiry to This Supplier
You May Also Like
-
Traffic Signal LampNegotiableMOQ: 2000 Sets
-
High Brightness LED Solar Warning LightUS$ 4.9 - 5.4MOQ: 1000 Pieces
-
Yellow Full Ball Traffic LampNegotiableMOQ: 50 Pieces
-
Solar 16pcs Led Traffic Warning Light/flasher/strip Light/road LampUS$ 0.01 - 1MOQ: 3000 Pieces
-
LED Traffic Warning LightNegotiableMOQ: 1000 Pieces
-
Steel Case 18 Inch LED Light Traffic Radar Speed DisplayUS$ 1,000 - 3,000MOQ: 1 Piece
-
Plastic Traffic Safety Emergency Foldable Warning Triangle LabelsNegotiableMOQ: 200 Pieces
-
Caution Board/ Diffenect Caution Board for Sale/cleanging Caution Board/NegotiableMOQ: 1 Acre
-
Rotomolding Direction Board , PE Plastic Road BoardsUS$ 10 - 150MOQ: 200 Sets
-
Temperature Warning StickerUS$ 23 - 45MOQ: 40 Pieces




