PVC/PP Cooling Tower Fill Packing/Water Treatment Cooling Tower Fill
Cooling Tower fill is the most important part of the cooling tower, its efficiency high and low which depends on the cooling water and air in the packing of the extent of the full access. And our Company Cooling Tower fills have the advantage as bellows:
1. Anti-aging
2.Excellent Performance
3.Long Service life
4.Good heat exchange perfomance, and excellent Cooling efficiency
5.Easy to install
PVC Cooling Tower Filling Media:
1. Marly PVC fills, Size: 1220*300mm, 1220*600mm
2.Use Temperature: 50-68C
3.Absorption rate: < 0.015%
4.Drift water loss rate:<0.001%
PVC Cooling Tower filter Filling Technical Data:
SURFACE AREA |
SHEET SPACING |
FLUTE ANGLE |
SHEETS PER FT. |
MEDIA PACK SIZES: |
||
Minimum |
Maximum |
Standard |
||||
48 ft2/ft3 |
19 mm |
30° |
16 |
D: 12 in |
D: 24 in |
D: 12 in (305 mm) or |
fill pack for cooling tower media and type:
|
Length(mm) |
Height(mm) |
Film thickness(mm) |
|||
Size |
Tolerance |
Size |
Tolerance |
Size |
Tolerance |
|
"S" Wave |
1000 |
±10 |
500 250 |
±5 |
0.4 |
±0.05 |
2000 |
±10 |
500 250 |
±5 |
0.4 |
±0.05 |
|
Double Inclined |
1000 |
±10 |
500 250 |
±5 |
0.4 |
±0.05 |
Inclined Wave |
1000 |
±10 |
500 |
±5 |
0.4 |
±0.05 |
cooling tower filler heating Power and Resistance Character:
|
Fill Height |
Cooling No. (Volume Scattered Coefficient: Ka) |
Resistance Equotion:P/p1=9.81*A*Vcpm A.M expression |
"S" Wave |
1m |
=1.83y0.65 |
A=-0.0019q2+0.0685q+0.06543 |
Ka=4746g0.56q0.36 |
M=-0.0028q2-0.0170q+1.9480 |
||
Double Inclined |
1m |
=1.92y0.68 |
A=-0.0006q2+0.0306q+0.06376 |
Ka=4342g0.69q0.36 |
M=-0.0002q2-0.0026q+1.9029 |
||
Inclined Wave |
1m |
=1.85y0.64 |
A=-0.0001q2+0.189q+0.6374 |
Ka=4296g0.63q0.38 |
M=-0.0006q2-0.0122q+2.0178 |
Remark: P-Fill Resistance,Pa P1=Air density,kg/m3 q---Spray waterdensity,t/(m2*h) Vcp-Spray Fill Average Wind Speed m/s
g--Ventilation density kg/(m2*h g-gas water radio
PVC Fill for Cooling Tower:
This kind of cooling tower fill with the advanced technical, long lifetime, low resistance, light weight. During the service, the fill can increase the water flow process. It is widely used in Square cooling tower.
1) Application: put into the square cooling tower.
2) Characters:
acidproof, alkali-resisting, anticorrosion for the organic solvent
good performance of inflaming retarding
oxygen index≥31
3) Description:
Normal Size:500mmX1000mm
OR
Width: Meet your demand
Length: Meet your requirement.
Thickness: Meet your demand
4) Working temperature:
PVC: -20°C~70°C
Send Inquiry to This Supplier
You May Also Like
-
POM Granules DuPont 100P Low Friction Wear‑Resistant for Precision Mechanical PartsUS$ 1.1 - 1.2MOQ: 1 Kilogram
-
PVC UV Panel With Marble, Stone, Granite Etc. Pattern Glossy Surface Perfect Wall Panels for Home and OfficeNegotiableMOQ: 100 Pieces
-
Custom Corrugated PP Plastic Sign for Outdoor & Indoor Display SolutionsNegotiableMOQ: 3000 Pieces
-
Elastomeric Rubber Foam Insulation Sheet for Refrigeration Systems and Thermal PipingNegotiableMOQ: 500 Square Meters
-
Plastic Sheet, Board & PanelNegotiableMOQ: 2500 Pieces
-
Polypropylene Retort Plastic Separator SheetsUS$ 11.50MOQ: 10 Sheets
-
Plastic Tube Steel Security Half Round Fence Post CapsUS$ 0.09 - 0.31MOQ: 1 Piece
-
Factory Wholesale Supply Rain Water Drainage Plastic Pvc Rain Gutter Cover Roof Anti Leaf Rain Gutter GuardUS$ 1.53 - 1.74MOQ: 3000 Pieces
-
Retort Separator PP Sheets With Factory PriceNegotiableMOQ: 1
-
Super Clear Transparent Door Colourful PVC Strip Curtain Rolls PVC Door CurtainNegotiableMOQ: 1



