Contact Platform Support
Help CenterSinta STC Thumb Winder Fish Tape 50'
Related Products
-
50 FT Fish Tape With High Impact Case for Electric or Communication Wire PullerUS$ 15.11 - 25MOQ: 10 Sets -
Fish Tape,wire Cable Puller With 15M,30M,50MUS$ 15.11 - 28MOQ: 10 Sets
-
Cable Snake Steel Fish Tape Gardner BenderUS$ 15.11 - 30.99MOQ: 10 Sets
-
FRP Mobile Portable Public Toilet/WCUS$ 300 - 900MOQ: 1 Set
-
FRP Mobile Public ToiletUS$ 300 - 900MOQ: 1 Set
Cable Snake Steel Fish Tape 50FT
50 FT Fish Tape with High Impact Case for Electric or Communication Wire Puller
Thumb Winder Fish Tape 50'
- Guide the fish tape through narrow openings, then attach wires to the pulling loop and guide them smoothly to new location
- Reel winds up and stores excess tape as wire is pulled
- Built-in thumb lock holds wire in place
How to Pull Wires With a Fish Tape
With one person standing at the box to feed the wire, pull evenly on all of the wires to be fed. Try to keep the wires untangled as you feed them. Feed the wires by lubricating the wires with one hand and feeding them into the pipe, while pulling the wires off of the wire reels with the other.
As for the person actually doing the pulling on the other end, pull the wires in two to three foot intervals. Count to four and then pull again. Check with the person feeding to see if this is a good pace for them. Pulling too fast can nick the wires and catch your helper's fingers into the box. Leave enough time between pulls so that the person feeding has time to lubricate the wire and pull enough off of the wire reels to feed into the conduit. A simple signal to alert each other that you are ready for the next pull is to tap on the pipe with something like a tool.
Caring for the Fish Tape
Make sure to inspect the reel before each use. Check that its screws are not loose and that there are no cracks. When the pulling loop at the free end of the fish tape weakens, break it off and make a new one. To do this, heat the straight free end of the tape with a blow torch. Hold the hot tape with a pair of pliers. When it gets red hot, bend 0.5 inches of the heated tape over with a second pair of pliers. While the tape is still hot, bend tape over again by 1 inch to make a double loop.
Cable Snake Steel Fish Tape packing
Sinta is speciallized in the filed of Fiberglass duct rodder, Steel duct rodder,FRP rodders,fish tape. We have been in this filed for mroe than 12years, and our duct rodder and fish tape sell well on global market. Customization for option. We are very happy to support each customer with our reliable quality and competitive prices.
Our strength lies in
- Quick response. Each inquiry will be answered within 24 hours.
- Professional
- After-sale service
- Good packing ensure cargo safety
- Guarantee:6months
Our office and team
If you are instersted in our Cable Snake Steel Fish Tape,50 FT Fish Tape with High Impact Case for Electric or Communication Wire Puller,please contact us freely, we'll offer best quotation for you at our earliest!
Send Inquiry to This Supplier
You May Also Like
-
Wire Connection TerminalNegotiableMOQ: 2600 Pieces
-
Extrusion Copper Brass TerminalUS$ 0.1 - 0.1MOQ: 100 Pieces
-
Hot Self Locking Plastic Strap Nylon Cable TieUS$ 0.014 - 0.016MOQ: 10000 Poles
-
TC-652-A No Glazed Plated 600V 2 Pole 16mm 65A Porcelain TerminalUS$ 0.1 - 5MOQ: 300 Pieces
-
Vaccum Contractor Use Tungsten-Copper Alloy Electrical Contact MaterialsUS$ 0.01 - 0.03MOQ: 1 Piece
-
Fan RelayNegotiableMOQ: 1000 Pieces
-
PAUL FRANKI WIRE KEEPERNegotiableMOQ: 3000 Pieces
-
Metal Parts With Electronic HardwareUS$ 1 - 100MOQ: 1 Piece
-
Spring Tooth, Double Spring, Spring Hay Rake WheelUS$ 2 - 4.6MOQ: 5000 Pieces
-
OEM Factory Supply Bimetal Strip, Bearing Strip Used For Make Bearing BushingUS$ 0.01 - 3MOQ: 500 Pieces
