Home > Electrical & Electronics > Switch > Pressure Switch > JH-3D Water Pressure Controller

JH-3D Water Pressure Controller

JH-3D Water Pressure Controller photo-1
US$ 9.5 - 15 MOQ: 1 Piece
Key Specifications
Get Latest Price
Place of Origin:
Zhejiang, China
Brand Name:
JIAHONG( pressure controller)
Model Number:
pressure controller(JH-3D)
Payment & Shipping
Payment Methods:
Port of Shipment:
NINGBO/SHANGHAI
Delivery Detail:
Delivery time depends on order quantity.
Place of Origin Zhejiang, China
Brand Name JIAHONG( pressure controller)
Model Number pressure controller(JH-3D)
Max. Current 20A
Max. Voltage 240V
Max. Working Pressure 20bar

 

  

 JH-3D water pressure controller

   Pressure Controller JH-3D  

 

 

Product Description

Description:

 

 

 The electronic controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of the system. The controller can keep a constant pressure and water flow in the system as long as any tap in the system is open during the pump’s operation.

Construction characteristics:  

-Inlet:                                                R1’’ 

-Outlet:                                             R1’’ 

-Special non return valve to avoid surges

-Pressure gauge

-Tension LED:                                 (Power)

-Pump-working LED:                        (On)

-Security system LED:                     (Failure)

-Manual start switch                        (Reset)

-Security system avoiding the possibility for the machine to work without water

 

 

Functions

Function:

 

 

1. Automatic pressure switch used for drinking water or non-potable water

    piping systems.

2. Replace the traditional system which assembled with pressure switch,

    pressure tank and check valves.

3. It starts the pump automatically when pressure decrease (tap opening) and

    stops it when there is no flow (tap closing).

4. Stop the pump automatically when water shortage.

 

 

Technology

Technical Data:

  

Rated Voltage: 110V-240V
Frequency: 50/60Hz
Max. Current: 10A; 20A
Max. Power:  1.1KW; 1.5KW
Starting Pressure: 1.2bar; 1.5bar; 2.2bar
Max. Pressure: 10bar
Joint Screw: R1"
Protection Grade: IP65
Max. Operating Temperature: 60
Cable Specifications: 7.5-9mm

 

Optional:

Color: blue; red; yellow
Starting Pressure:  1.5bar; 2.2bar 
Max. power: 1.1KW; 1.5KW
Cable Specifications: 7.5-9mm

 

 

       

 

 

FAQ

 

 

Possible Problems:

 

 

 

 Problems 

               Possible causes

                       Solution

 pump does not stop

  1. Water leakage higher than 1.2l/min at some point.

  2. Manual start switch (RESET) is blocked.

  3. Breakdown on the electronic board.

  4. Incorrect electric connection on electronic board.

 

  1. check the system, the tap, etc

  2. Press it for several times. Consult your dealer if the problem persists.

  3. proceed to its substitution

  4. check the connection (line and motor)

 pump does not start 

  1. Not enough water supplies, the security system have been activated and LED (Failure) is on. 

  2. Pump is blocked: LED (Failure) is on and the security system is activated. When we act on the manual start switch (Reset) the LED (ON) is activated but the pump doesn't work.

  3. Failure in the electronic circuit 

  4. No electrical supply 

  5. Not enough pump pressure

  6. air in the pump aspiration

  1. Check the water supply and restart the pump through the reset switch (Reset).

  2. Consult your dealer.

  3. Switch off power supply, wait a few seconds and turn it on again. If the pump doesn't start immediately then replace the circuit.

  4. Check the proper electric feeding. The tension LED (POWER) should be on.

  5. The security system has been activated and the corresponding LED (Failure) is on. Check that the pump pressure is 0.8bar higher than the starting pressure of the controller.

  6. The pressure gauge will indicate a pressure lower than the nominal or constant oscillations. The security system will act by stopping the pump and the LED (Failure) will be on.

 the pump starts and stops repeatedly

 Small leakage in some point of the installation

 Verify possible tap of tank leakages and repair them.

 

 

 

 

Company Information

 

JH-3D water pressure controller

 JH-3D water pressure controller

                 
 

 

  Wenling Carven Electric Co., Ltd is a professional manufacturer of automatic pressure controls. The factory is located in Wenling, Zhejiang province, with convenient transportation and favorable environment. We are devoting ourselves to development, production and sales for the professional pressure controls. There are rich production experience and development capabilities for our factory. Based on the preferential price and high quality, our products have received the high praise from the general customers. We have “quality-oriented, customer supreme, credibility first” for the purpose, sticking to the principle of mutual and win-win cooperation set each other. We are looking forward to establishing business relationship with customers all over the world. Welcome to inquire and discuss cooperation.

 

Warranty

JH-3D water pressure controller 

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer, Trading Company
Year Established
2013
Factory Size
3,000-5,000 square meters
Total Employees
11 - 50 People