Portable Pneumatic Capping Machine, Capping tightening machine, screw capping machine

Specifications

pheumatic capper
use for the different size plastic cap
torque adjustable
high quanlity,easy operation

 

Portable pneumatic Capping machine  

 

♣Introduction:

Hand-held pneumatic capping machine widely applicable to any thread of open or tighten screw cap, it has a wide range of screw cap from bottle height, shape, size, weight and unscrew cover can twist the cap, easy operation, low fault rate low prices, and other features, is the best tighten screw cap...etc. Especially suitable for large bottle, and heavier or bottle shapes, or lid specification more bizarre twist, often change of covering.

 

Technical parameters:
Capping scope 5-30mm30 90mm -
Capping speed 30 bottles/min
Host 0.6 kg/net 1.1 kg
Gas pressure more than 4.5 kg/kg/cm2, less than 62,000 cm2
YongQiLiang 0.08 m3 / min
Speedy connector 1/4 inches
The clutch adjustable

Please Note:
Due to the customs , we are unable to offer Lubricating Oil with the pneumatic capping machine .
1,please add lubricating oil to the machine frequently
2,add 2 droplet before you start to  use the machine every time 
3,about the lubricating oil , it should be thin and clear ,without any impurity ,such as the oil for sewing machine . Please keep in mind that engine oil can't be used for this machine .