Contact Platform Support
Help CenterHydraulic Volumtric Expansion Test Machine for Gas Cylinder
Related Products
-
DW-01 Gas Cylinder Test Equipment for Gas CylinderUS$ 100 - 3,000MOQ: 1 Piece -
SY-02 Hydrostatic Test Machine for Seamless Gas Cylinder Test EquipmentUS$ 100 - 3,000MOQ: 1 Piece
-
PFX-01 Hydrostatic Test for Seamless Gas Cylinder Test EquipmentUS$ 100 - 3,000MOQ: 1 Piece
-
CX01 Shot Blasting Rust Remover EquipmentUS$ 100 - 3,000MOQ: 1 Piece
-
GZ-01 Cylinder Internal DryerUS$ 100 - 3,000MOQ: 1 Piece
Specifications
Hydraulic tester for seamless gas cylinderexternal measurement
gas cylinder inspection machine
Certificate:ISO9001
Hydraulic tester for seamless gas cylinder (external measurement)
Main technical parameter:
Pump model |
G64WL |
Max pressure |
48Mpa |
Electronic balance |
0-1500g (accuracy 0.1g) |
Pressure sensor |
0-70Mpa (accuracy 0.1g) |
Test pressure |
≤40Mpa |
Air pressure |
0.6-1.0Mpa |
Work power |
AC220V/50HZ |
Control mode |
PC/Manual |
Applicable medium |
Water |
Flow |
3L/Min |
The machine is mainly used for cylinder pressure test and achievement of gas cylinder volume residual deformation rate.
Working principle: put the cylinder into a water jacket and boost the cylinder by high pressure pump. It will automatically dwell at set pressure and do pressure test on the cylinder. At the same time, the cylinder valume expands under test pressure and squeezed some water from water jacket into the measuring cup, and it is test cylinder volume deformation. The water is transferred to PC by water collection system, the elastic deformation disappears after cylinder relief of pressure, then the water flows back from measuring cup to water jacket.However, the remainning water in the measuring cup is still more than that before boosting the cylinder. The extra water volume is the test gas cylinder volume residual deformation. While the gas cylinder volume residual deformation rate is the ratio of the test gas cylinder volume residual deformation and all deformation.
Note:
ing pressure: 48Mpa,
The actual test pressure control accuracy:no less than 10 psig
The actual water level measurement accuracy: no less than 0.4.
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Computerized Servo Motor Control Universal Tensile Testing MachineUS$ 4500 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
Computer Controlled Electronic Universal Tensile Testing Machine 20knUS$ 4500 - 10000MOQ: 1 Set
-
Computerized Universal Testing Machine With Extensometer 20knUS$ 4500 - 10000MOQ: 1 Set
-
Servo Motor Control Material Lab Testing Machine With ExtensometerUS$ 4500 - 10000MOQ: 1 Set
-
Computerized Electronic Universal Ceramic Materials 3 Point Bending Testing Laboratory Equipment 30knUS$ 4500 - 10000MOQ: 1 Set
-
Servo Motor Control Material Lab Testing Machine Saleable Computer Controlled Material Lab Testing MachineUS$ 4500 - 10000MOQ: 1 Set
-
Computer Controlled Electronic Universal Tensile Testing Machine 100kn One Column Computerized Universal Testing Machine 5knUS$ 4500 - 10000MOQ: 1 Set
-
High-Quality Computer Controlled Electronic Fabric Tensile Strength TesterUS$ 4500 - 10000MOQ: 1 Set
